Last Activity:04-07-2016 5:05 AM
1 Likes on 1 Posts
Posted in thread: Doubling Down: SS Brewtech Conical + FTSS + Glycol Power Pack on 04-12-2016 at 05:38 PM
Has anyone used the chiller mfabe originally mentioned in his post? I'm thinking of getting
that one, but want to make sure there is plenty of room to put multiple pumps in it instead of
Posted in thread: Peltier cooler on a conical. Experience? on 06-08-2015 at 09:48 PM
Tribble have you been able to experiment with this any further?
Posted in thread: My insane 25 Gal, 100 Percent Hard Plumbed Tri-Clover, Automated Tippy Build on 11-06-2013 at 12:30 AM
The main issue I see with using the sankes is you won't be able to fit a single batch into one.
Therefore you will need to use more than one, which inturn limits you to only being able to
ferment one ...
Posted in thread: Keezer build - insulation question on 10-15-2013 at 09:20 PM
The reflective insulation is beneficial to minimize radiant heat transfer into a space. You
really don't need to worry about this with a keezer and the thermal difference either way isn't
going to mak...
Posted in thread: DIY glycol chilled plastic conical fermenters on 10-10-2013 at 04:00 PM
So I am in the process of mimicking your build. I would like to double it though. Which of the
components, especially in the BCS portion need to be doubled up? I have already purchased the
BCS-462 to ...
Posted in thread: DIY glycol chilled plastic conical fermenters on 10-09-2013 at 07:50 PM
I had stripped it out of the design due to the limitation of the number of outputs the BCS will
allow you to associate to probes. There's apparently a workaround with process states that will
let you ...
Posted in thread: Painting Control Panel Technique on 09-23-2013 at 01:30 AM
heckelsUnfortunately I didn't think about it until after the fact and the forum member was nice
enough to cut out the items for me for free so I hated to ask him to do it again. I am happy
with how it...
Posted in thread: Painting Control Panel Technique on 09-21-2013 at 10:18 PM
alien that is a good idea. Please post some photos once you get them printed.
Posted in thread: Painting Control Panel Technique on 09-21-2013 at 09:08 PM
vindee that is one nice looking control panel. I painted mine and tried to paint the logo but
couldn't get it cut out well enough to then paint onto the panel. I was luck enough to have a
forum user c...
Posted in thread: Painting Control Panel Technique on 08-10-2013 at 07:11 PM
I'm going to try the paint method and if it doesn't work then I'll try the slide decal you
mentioned. I have the boxed primed and drying now. Hopefully I can get a base coat on it later
today or tomor...