Gift Premium Subscription To JoeCoastie

Join Date:


Last Activity:

03-21-2006 5:31 PM


  • Hampton Roads, Virginia
  • Been brewing beer for 6 years, married with 1 daughter
  • Outdoors rec. brewing,etc.
  • US Coast Guard (active duty)
  • Sean Willard


  • Posted in thread: got kegs? on 02-26-2006 at 04:28 PM
    Personnally I think you'll pay way to much in shipping if you go the ebay route, been there
    done that!You can get used kegs from, they have free shipping on order of
    $50.00 or more, or...

  • Posted in thread: Removing Hops (Hop Pellets) on 02-26-2006 at 03:11 AM
    Good question, I don't think there is really a wrong way to do it, just a matter of preference.
    When I brew I use the nylon socks for my hops as well as the grains. This reduces any build-up
    you might...

  • Posted in thread: Problem with first brew? on 02-22-2006 at 01:44 PM
    I'm not really familiar with the equipment you're using, but it sounds like the temp. being as
    low as it is could cause the fermentation process to take a longer. Be patient, hope for the
    best, and tr...

  • Posted in thread: Where to fill CO2 on 02-18-2006 at 11:58 PM
    You can also get them filled at fire fighting equipment suppliers where they sell and service
    CO2 fire extinguishers, that's where I get mine filled.

  • Posted in thread: Cornelius Kegs on 02-18-2006 at 09:41 PM
    psymonkey:You can buy an entire keg system from that has 3 used kegs, the CO2 bottle,
    the dual guage regulator, the hose setups, new gasket/seals, and instructions for $165.00
    (everything yo...

  • Posted in thread: Keg problem on 02-18-2006 at 09:36 PM
    Good lookin' pint! What happens if you just leave the pressure set at 10psi and pour?

  • Posted in thread: Keg problem on 02-18-2006 at 07:29 PM
    I just went out to the garage and poured the first glass of beer from my keg. I had no issues
    with foam pouring at 12 psi. I'm using the setup that was supplied with my keg system that I
    bought online...

  • Posted in thread: Keg problem on 02-18-2006 at 06:39 PM
    Great! I'm glad you guys set me straight! Thanks for your insight!Sean

  • Posted in thread: Keg problem on 02-18-2006 at 04:46 PM
    I just went down and poured (or tried to pour) a pint and got nothing but foam. My regulator is
    set at 10 PSI. Should I set the regulator to 5psi and try again? It seemed to pour way too
    fast. Also, i...

  • Posted in thread: 5 best american breweries on 02-17-2006 at 02:42 AM
    Yeah thats a real tough one, it would be next to impossible to say who is best, but I'll go
    ahead and list some of my favorites.1. Saranac (Upstate NY, love their Pale Ale!)2. Bells
    (Michigan)3. Blue ...

Following Stats
Up Next: Red Ale Primary: Seconday: Kegged: Stoudt's IPA Clone Bottled: Sweet Porter Ale

Newest Threads