VIEW MY

jmaccool

Gift Premium Subscription To jmaccool

Join Date:

12-19-2012

Last Activity:

04-21-2014 9:42 AM

LATEST ACTIVITY

  • Posted in thread: Igloo Kegerator at Walmart - $369 on 08-21-2014 at 06:45 PM
    Just bought this and have set it up. What adapters/connections do I need for a 5 gallon ball
    lock keg?You will need a liquid and gas versions of the item listed below (link) and any
    adapters that migh...

  • Posted in thread: Igloo Kegerator at Walmart - $369 on 03-20-2014 at 07:24 PM
    Anyone try to fit a tall 1/4 and a 1/6? This is what I'll be using it for or a tall 1/4 and a
    pin lock corny.Sent from my iPad using Home BrewI have had corny kegs in mine on more than one
    occasion. T...

  • Posted in thread: Igloo Kegerator at Walmart - $369 on 03-20-2014 at 07:21 PM
    I did the same, you need to go into the temp gauge and move the set screw until it gets to a
    more reasonable temp. This was a really stupid move on their part putting the probe somewhere
    that does not...

  • Posted in thread: Igloo Kegerator at Walmart - $369 on 01-28-2013 at 03:59 PM
    I'm still having issues with this kegerator.. I have adjusted the temperature by getting the
    thermostat out from behind the coils, it's at 35F now given the water glass inside and
    thermometer. I have ...

  • Posted in thread: Igloo Kegerator at Walmart - $369 on 01-19-2013 at 10:30 PM
    I'm confounded by this thing. Where is the set screw? This is my first keg system and I cannot
    figure this out.You have to unscrew the temp control box from the fridge by removing the 3
    screws and the...

  • Posted in thread: Igloo Kegerator at Walmart - $369 on 01-10-2013 at 07:31 PM
    If you want it warmer then you will have to go into the thermostat housing and adjust the
    screw. Just back out the three screws, pull the dial out, look for the one screw and turn it
    righty-tighty. Do...

  • Posted in thread: Igloo Kegerator at Walmart - $369 on 01-10-2013 at 07:16 PM
    Hmm I undid those clips but it seems like its also taped or something. I might just run a
    Johnson controller on this, my problem is that it's constantly staying at sub forties
    regardless of the thermo...

  • Posted in thread: Igloo Kegerator at Walmart - $369 on 01-09-2013 at 02:37 AM
    So I loosened the screws on the chill plate and tried to pop the temp probe off the back. Is it
    glued or taped into place some way? I'm having a bit of a hard time moving it and I can really
    see what ...

  • Posted in thread: Igloo Kegerator at Walmart - $369 on 01-04-2013 at 09:25 PM
    thanks jmaccool for the direction on the screw, I will do about 7 revolutions the other way to
    undo my warming then and be ~3 revs to the cooler side. Is anyone not happy with the Sankey
    valve that co...

  • Posted in thread: Igloo Kegerator at Walmart - $369 on 01-04-2013 at 06:09 PM
    The first issue I am hearing is the cooling one, I took the temp gauge out from behind the
    "cooling Panel" which is really the freezer basket which in most mini fridges just straightened
    out and screw...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS

PHOTO OF THE DAY