VIEW MY

jlatenight

Gift Premium Subscription To jlatenight

Join Date:

01-29-2012

Last Activity:

12-04-2014 10:26 AM

1 Likes on 1 Posts 

    ABOUT ME

  • Single
  • East Bridgewater
  • MA

LATEST ACTIVITY

  • Posted in thread: Man Mug Giveaway - Open to All on 11-04-2014 at 09:44 PM
    I'm in!!

  • Posted in thread: DIY Beer Line Cleaner on 10-07-2014 at 01:37 PM
    Because A) someone always has a good answer on these threads, B) I like having the option of
    reusing things for other purposes without damaging them, and C) I'm anal and I like when things
    just work, ...

  • Posted in thread: heat stick...short? on 09-04-2013 at 04:28 PM
    Thanks for the replies guys. I actually did take my multimeter and stick the probes in a blob
    of the stuff while wet and it wasn't conductive, so does that mean it's not that stuff causing
    the GFCI to...

  • Posted in thread: heat stick...short? on 09-03-2013 at 09:50 PM
    Guys, I made a heat stick following these directions which worked once, then leaked water so I
    had to undo it, reseal it, and close it back up again. This time I used this stuff to seal the
    terminals ...

  • Posted in thread: MLT manifold question on 05-23-2013 at 03:17 PM
    I'm going to build a copper manifold for my MLT and I had a question regarding what palmer says
    about the design. He says:"The transverse tubes in the rectangular tun should not be slotted to
    prevent ...

  • Posted in thread: How to increase my efficiency on 01-15-2013 at 02:37 AM
    Thought I'd report back. I've done a couple batches and I've been hitting my numbers
    consistantly now. I checked all my thermometers, like 5 or 6, digital and analog, and they were
    all off a degree or...

  • Posted in thread: hose for 1/2" bard to 3/8" soft copper? on 01-08-2013 at 04:15 PM
    Perfect! That's what I needed to know. Thanks!

  • Posted in thread: hose for 1/2" bard to 3/8" soft copper? on 01-08-2013 at 02:53 PM
    Looking for some suggestions here. I made a CFC following the directions from this site found
    here I have a 1/2" barb on my keggle and the CFC has 3/8" copper. Not sure how to connect the
    two together...

  • Posted in thread: "Beer Machine" mix with traditional equip? on 12-21-2012 at 08:53 PM
    I have a bag of beer "mix" from my "Beer machine" that I'd like to make with my typical beer
    equipment. You would simply add the mix to water in the beer machine, pitch the yeast, and
    that's it, but I...

  • Posted in thread: Bad Brew Days! on 12-19-2012 at 02:51 AM
    actually this past Sunday I brewed a 10gal batch of double IPA and had more trouble than any
    other batch so far. First, I was filling up my 6 gal kettle with water from my fridge since
    it's filtered. ...

FORUM SIGNATURE
primary - Cider Secondary - columbus pale on tap - Arrogant bastard clone Elmwood Brews
0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS