jkmcd3

LATEST ACTIVITY

• Posted in thread: Stc 1000 on 03-20-2013 at 04:35 AM
  John when all is said and done, would you do it exactly the same way again? I'm sure the large
  box made space a non-issue, but I'm personally going to try to shrink things for my second
  STC1000 box.Ac...

• Posted in thread: Stc 1000 on 03-19-2013 at 09:47 PM
  I put together a couple of drawings for my little STC project. Basically using other drawings I
  found around online, including the one posted above.If you go to post number 10 on the first
  page, that ...

• Posted in thread: HomeBrewTalk 2013 Big Giveaway! on 02-05-2013 at 04:31 PM
  Definitely In.... Wow what a big giveaway. Thanks to all the vendors!!John

• Posted in thread: Multiple STC-1000 Controllers on 01-28-2013 at 06:31 PM
  You may want to seriously consider switching the Heat and Cold receptacles... Most
  refrigerators have a 90° plug on them and this will hinder the access to your lower receptacle
  to be used for heat.Yo...

• Posted in thread: Multiple STC-1000 Controllers on 01-28-2013 at 05:01 PM
  Here is the updated parts photo (showing the THHN wire and the plastic flex conduit) as well as
  a parts list (which keeps me organized when i go to buy everything I need). Hope this can help
  some of y...

• Posted in thread: Multiple STC-1000 Controllers on 01-28-2013 at 04:50 PM
  So here it is all finished up. I tested it out with some lamps and it worked perfect. I got
  them both programmed as well: STC on the left controls the outlet on the left. The top outlet
  is cool and t...

• Posted in thread: Multiple STC-1000 Controllers on 01-27-2013 at 07:04 PM
  So I could use just a small piece of wire and run it from one neutral post to the other,
  leaving what I currently have in place as well?So this worked. Thanks for all the help guys. I
  will post some p...

• Posted in thread: Multiple STC-1000 Controllers on 01-27-2013 at 06:25 PM
  If I read your description correctly, you have the neutral from the power cord connected to one
  half of the duplex receptacle, then the bridge between the halves removed, then the neutral for
  the cont...

• Posted in thread: Multiple STC-1000 Controllers on 01-27-2013 at 05:57 PM
  Thanks reynolds for the heads up on the wiring. I took all that junk back and just got 14ga
  THHN by the foot. Actually saved me about 15 bucks so I was happy about that.Well... I got it
  all wired up a...

• Posted in thread: Multiple STC-1000 Controllers on 01-23-2013 at 11:10 PM
  Also, I decided to just run 14ga throughout the entire box (drawing does not show this, so I
  should update it). This shouldn't be an issue should it?I just did not want the extra expense
  of buying 14 ...