jkatz419

Gift Premium Subscription To jkatz419

Join Date:

05-09-2011

Last Activity:

10-11-2014 8:14 PM

Likes Given: 1

    ABOUT ME

  • Single
  • Studio City
  • CA

LATEST ACTIVITY

  • Posted in thread: Nitro pour is half foam? on 08-10-2014 at 05:39 AM
    I've had a Nitro setup for a few months now and have used it with two kegs of stout. The third
    keg I put on it is an English pub style ale. When this pub ale pours I get a full glass of foam
    that then...

  • Posted in thread: Cider served by nitrogen/stout faucet? on 08-05-2014 at 06:42 AM
    Has anyone here tried serving a hard slightly carbonated (~1.5 vol) hard cider through a stout
    faucet using nitrogen or beer gas mixture? I have a nitro setup and have been using it for
    stouts and the...

  • Posted in thread: Best shutoff valves? on 04-06-2014 at 02:26 AM
    Well after getting no replies :drunk: I went ahead and bought 2 of these: because I was
    ordering some other stuff from MWS, hopefully they aren't garbage quality (the reviews with
    several different ...

  • Posted in thread: Best shutoff valves? on 03-31-2014 at 07:24 AM
    I've had a run of shutoff valves that used to be ok but now leak gas (if you touch them you can
    hear gas venting). I'm looking to replace them and would rather spend a few extra bucks to get
    quality r...

  • Posted in thread: are gas check valves "one way"? on 03-18-2014 at 06:41 AM
    yeah, I was sort of thinking that. Thanks for confirming!

  • Posted in thread: are gas check valves "one way"? on 03-16-2014 at 11:11 PM
    If you have a shut off valve that also has a check valve in it does it only allow gas to flow
    in one direction? My gas distributor has a barb on the end and I want to replace it with a MFL
    connection....

  • Posted in thread: Newcastle Cabbie Black Ale? on 02-01-2014 at 06:36 AM
    Has anyone had the Newcastle Cabbie Black Ale? It's a 4.2% mild that has a ton of flavor (and
    according to one website 25 IBU). I'd love to clone it but I can't find much info on the
    ingredients used....

  • Posted in thread: Dual body regulators and pressure release valves on 01-10-2014 at 06:34 AM
    huh, that add-on is actually kind of cool and let's me keep using my existing regulator that I
    like. Decisions decisions...

  • Posted in thread: Nitrogen regulator washer needed? on 01-10-2014 at 06:22 AM
    Thanks zachattack!

  • Posted in thread: Nitrogen regulator washer needed? on 01-09-2014 at 07:10 AM
    My CO2 regulator had a neoprene washer that sits between the regulator and the cylinder to
    ensure a tight seal. I just got a Nitrogen regulator and cylinder (for mixed beer gas), does it
    also need a w...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS