Last Activity:07-06-2013 2:36 PM
Likes Given: 1
Posted in thread: Stirring during mash-in on 03-19-2013 at 11:54 PM
Thanks for the suggestions. I think I'm gonna try stirring until the mash is the same temp all
over. I've noticed my mash having different temperatures based on where I stuck the thermometer
Posted in thread: Stirring during mash-in on 03-19-2013 at 09:05 PM
Ok, so I'm pretty new to the all grain business and have been getting some pretty low numbers
while batch sparging (efficiency and missing gravity points) I've been looking for the amount
of time I sh...
Posted in thread: How's my water profile look on 11-24-2012 at 07:12 PM
I just moved to San Diego and I'm not very good with the whole reading of water profiles. I'm
in the Miramar treatment area and this is what I've got so far. How does it look? Thanks in
advance for th...
Posted in thread: Keg conditioning a hefe? on 09-18-2012 at 08:34 PM
It's not exactly a hefe but when I make my blue moon clone it seems to be at it's best after a
week or 2 in the keg and i set it at 30psi for 36 hours and then down to about 12 or so to
Posted in thread: yes, another bad efficiency thread... on 09-05-2012 at 07:45 PM
a mill is definitely something i want but since i still can make delicious beers with low
efficiency and am looking in to surfing, i figure ill try to bring the ph level down a little,
mash long next ...
Posted in thread: yes, another bad efficiency thread... on 09-03-2012 at 03:25 PM
the ph has been around 5.6-5.7 on the last 2 brews and my mash tun is pretty empty, i have the
calculations down pretty well so that almost all of my sparge water ends up in my kettle
Posted in thread: yes, another bad efficiency thread... on 09-02-2012 at 05:32 PM
for my procedure: preheat the mash tun with 166 degree water (rectangular coleman cooler).
Empty the mash tun, Add 4 gallons of 166F(lets me hit my 156F mash temp) water and pour in
12lbs grain bill a...
Posted in thread: yes, another bad efficiency thread... on 09-01-2012 at 10:35 PM
i'm not sure about the gap on the mill because my hbs has one in the back that i just go back
and use. I'll post my exact procedures later. I mean im not too worried because the beer still
comes out p...
Posted in thread: yes, another bad efficiency thread... on 09-01-2012 at 09:05 PM
I've been brewing all grain for almost a year now and my beer usually turns out pretty good but
lately i've been paying attention to my efficiency and its been in the mid 50's. So i decided
to run the...
Posted in thread: what is in my 2row? on 08-13-2012 at 03:44 PM
The same thing happened in one of my mash's that I did the other day. My efficiency also seemed
to suffer from previous batches of the same recipe