Last Activity:12-04-2013 8:06 PM
Age:2013 years old
Likes Given: 2
29 Likes on 23 Posts
Posted in thread: Cheap Copper at Home Depot on 11-07-2013 at 05:12 PM
Looking at the tag, it's likely on clearance and probably only in stores. Usually yellow tag
means clearance. Also, this is the time of the year to find a clearance item since they reset
Posted in thread: Brew stand for rectangular cooler MLT on 11-06-2013 at 10:22 PM
If I'm understanding you correctly, you have one burner that I assume you use to heat your
strike water and to boil with. If this is the case, all you really need is a table that puts
the valve of you...
Posted in thread: Chiller Upgrade on 11-06-2013 at 10:07 PM
If you want to save some money and do DIY, you might consider making a 30'-50' immersion
chiller out of 1/2" copper tubing. There is nothing inherently wrong with an immersion chiller.
It's just that ...
Posted in thread: Brew Dogs... on 11-06-2013 at 08:41 PM
Should be interesting to see if this gets picked up for another season.
Posted in thread: Minifridge that fits carboys? on 11-05-2013 at 03:04 PM
WIth stc-1000 controlling the temp it will go to whatever temp you set it. Plus you can lager
it in the keg you will later serve it from and kepe that in your kegerator/keezer. I unplugged
Posted in thread: Using 5.2 with Bo Pils on 11-04-2013 at 09:26 PM
You're better of taking the money you were going to spend on the 5.2 and buying 10 gals of RO
water. You should be able to use a 3% max acid malt addition along with about 1/2 tsp of CaCl.
Posted in thread: Hopalicious clone on 10-31-2013 at 05:52 PM
I've seen this bottled before. Which I suppose isn't that big of a deal since you could look at
their whole operation while standing in the bar at their old location. But, I believe they also
run the ...
Posted in thread: Only flame out addition on 10-28-2013 at 12:58 AM
You should check out the latest addition of Zymurgy. It has an article specifically about this
Posted in thread: Ph and dark grains on 10-18-2013 at 10:51 PM
I do a mash out, so I add them just before I start to ramp up the temperature. Probably extract
for 10 min tops before I start to sparge (batch)Another alternative is to steep the roast malts
in cold ...
Posted in thread: Homebrewing in an RV on 10-18-2013 at 04:44 PM
You could do small batch BIAB as opposed to extract. Just depends on wht you prefer. Small
batches are probably the way to go. Maybe 2.5 gals as others have suggested. Keep in mind, the
batch size wil...