jimmayhugh

Turgid Member

Gift Premium Subscription To jimmayhugh

Join Date:

02-06-2011

Last Activity:

05-29-2015 8:47 AM

Likes Given: 3

58 Likes on 51 Posts 

    ABOUT ME

  • Court Marshal
  • Hiney The Other DIPA

    Ole Mole Dark Chocolate Oatmeal Stout with Vanilla and Cayenne
  • Male
  • Married
  • Las Vegas
  • NV

LATEST ACTIVITY

  • Posted in thread: TeensyNet Project Interest? on 05-27-2015 at 12:54 AM
    In your git hub site for version 0.0.56, where is teensynet.sql placed?teensynet.sql is used to
    create the teensynet database and tables. If you're using the RaspberryPi image, it should
    already be se...

  • Posted in thread: TeensyNet Project Interest? on 05-20-2015 at 11:20 AM
    just a FYI. on your website ( , the link to WIZ820io doesnt work. shows 404 error.Fixed it,
    thanks,

  • Posted in thread: TeensyThermMonitor on 05-15-2015 at 06:54 PM
    My TeensyNet Project may be a bit too much for those of you that just want to be able to read
    the temperature of up to four fermentation chambers, keezer's, etc. I understand. :DLately I've
    been creat...

  • Posted in thread: TeensyNet Project Interest? on 05-10-2015 at 07:16 PM
    Is that a limitation of the 1-wire driver or some other piece of code?btw/fwiw, when running
    these sensors in parasitic mode, you have to use a pretty stiff pull-up, like in the 200 ohm
    range, instead...

  • Posted in thread: TeensyNet Project Interest? on 05-10-2015 at 05:34 PM
    While helping purdman10 with his project, I've discovered that there is a parasitic-only
    version of the DS18B20, the DS18B20P.This part has the same ID as the DS18B20 (0x28), and can
    be discovered by ...

  • Posted in thread: TeensyNet Project Interest? on 04-26-2015 at 05:12 PM
    I've added a Hardware Troubleshooting Page to my website that kind of encompasses what
    purdman10 and I have been doing here.

  • Posted in thread: TeensyNet Project Interest? on 04-26-2015 at 04:54 PM
    I was thinking... Does there need to be any pull-up 4k7 resistor on the LCD board using the v14
    board? I have filled all resistor positions on the LCD board that uses both a 5v and 3v3 line.
    If I reme...

  • Posted in thread: TeensyNet Project Interest? on 04-26-2015 at 03:34 PM
    Here's a short program to insure that both debug channels are working on the V14 board.

  • Posted in thread: TeensyNet Project Interest? on 04-26-2015 at 02:53 PM
    Is it possibly a hardware problem? Can I troubleshoot that in some manner?If you've got an
    oscilloscope, you can take a look at the I2C channel to see if it's working, especially at the
    input to the I...

  • Posted in thread: TeensyNet Project Interest? on 04-25-2015 at 11:54 PM
    OK, thanks for the instructions. I had a FTDI cable (3v3) when I previously went in and
    debricked my TP-Link AC1750 router. I changed to raw hid, I removed the comment in the program,
    and used /dev/tt...

FORUM SIGNATURE
0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS