Last Activity:05-17-2015 10:33 PM
Likes Given: 64
9 Likes on 4 Posts
Posted in thread: What PID should I get? on 05-07-2015 at 09:21 PM
Not to hijack the thread but I believe its kind of relevant-is the only difference between the
td4 and ta4 manual mode? In my reading it seems that way. Therefore in a mash tun or HLT ta4
for cheaper ...
Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 04-29-2015 at 08:41 PM
If you set the brewpi devices to not-inverted do the lights turn off? My SSR's have +/-
markings on them for the input side. The output side doesnt matter. its a switch.
Posted in thread: More crap electronics on 03-28-2015 at 03:55 PM
The price quoted in the previous post was with shipping included. Shipping to California, for
me, makes that auber pid(2352) $55.08. I think that's the point augidoggy was trying to
Posted in thread: Colorado Brewing System Controller on 03-25-2015 at 12:34 PM
Here is something that could help get you on your way: check Auberins for the PID, I think the
2362 is about 50 bucks. All you need the PID is a sensor, some wire from your local hardware
store and a...
Posted in thread: necessity of a dehumidifier on 10-22-2014 at 12:51 PM
Also try a small fan inside. Helps a lot.
Posted in thread: Automated mashtun on 10-21-2014 at 02:08 PM
Is that the auber project box?
Posted in thread: question about MAINTAINED PUSH BUTTON LED ILLUMINATED switches on 08-01-2014 at 05:16 PM
i have a chugger. not sure how many watts. it says 115v 1.4a, 50/60hzWatts = Amps x VoltsJim
Posted in thread: What post boil volume do you shoot for to get 5 Gal into your keg/bottling bucket on 06-19-2014 at 06:27 PM
As acidrain mentions... You need to enter your quipment. I find the default boil off rate was
too high. That will affect your calculations.Cheers,Jim
Posted in thread: Throwing my breaker with new equipment on 06-05-2014 at 05:39 PM
I agree. That thing is a beast. It most likely needs 20a dedicated.Cheers!
Posted in thread: Am I nuts? Looking for a specific wiring diagram on 05-01-2014 at 10:40 PM
Is the reasoning for running the RIMS at 110 because you have a 5500 watt @ 240V in the BK as
well?No, the boil kettle is not electric at this time. I have natural gas so this is a hybrid