Last Activity:12-11-2013 12:25 PM
Likes Given: 1
Posted in thread: Market Research - What do you need, but can't build? on 07-12-2013 at 11:19 AM
Circular heating elements similar to the new Blichmann Boil Coil without the Blichmann high
price. The standard water heater elements position in the middle of the kettle limit using
other equipment l...
Posted in thread: 10 gallon Blichmann Boilermaker on 05-12-2013 at 12:01 PM
That is where I bought it. Changed my setup before I had a chance to try it.
Posted in thread: 10 gallon Blichmann Boilermaker on 05-11-2013 at 01:36 PM
I have a lightly used 10 gallon Blichmann Boilermaker for sale. Built a 3 gallon electric rig
and no longer need this kettle.Includes everything it came with new plus false bottom and Hop
Posted in thread: What about an E-STOP button? on 03-13-2013 at 10:11 PM
I just finished a 120V build using the Auber box. I did not incorporate an E-stop button as the
box is small and the power buttons are easily accessible.Most electrical problems will occur
too fast to...
Posted in thread: HomeBrewTalk 2013 Big Giveaway! on 02-05-2013 at 03:39 PM
Posted in thread: Contactor Question on 12-01-2012 at 06:58 PM
Without a contactor in a 240v system your PID would only be able to output between 50%-100%
power; one leg would continually be Hot.I think you are misunderstanding 240v. Current flows
from one leg th...
Posted in thread: Electrical Diagram feedback for a 50A HERMS Build on 12-01-2012 at 03:18 PM
I suggest that you read the code that applies to the building wiring when it was installed.
I'll do that. You might learn something.I'm always willing to improve my understanding. Here's
something to ...
Posted in thread: Electrical Diagram feedback for a 50A HERMS Build on 12-01-2012 at 02:08 PM
I agree with lschiavo. Using a safety device as a control is a poor practice. Doesn't seem to
be much different than jamming needle nose pliers into an outlet to trip a breaker so you can
work safely ...
Posted in thread: Mark 2 Keg Washer on 01-23-2012 at 10:53 AM
I picked one up as well. I cleaned several corny kegs and two 6.5 gallon carboys without any
stability issues. As Mark stated, once the parts snap together it is very solid. Add another