- Posts 15
Last Activity:04-09-2014 5:46 AM
1 Likes on 1 Posts
Posted in thread: STC-1000 not cooling? on 10-25-2012 at 04:14 AM
There is a three minute adjustable delay for the cooling circuit. This is there to reduce the
amount of cycling of your compressor in your freezer. Once your high setpoint is reached your
fridge will ...
Posted in thread: Wort transfer from kettle question/idea on 01-20-2012 at 10:26 PM
This may work but it may lead to problems transferring your wort. When you feed from the bottom
of the vessel you are using the head pressure from the full volume of the kettle to start the
Posted in thread: Any body going to the WEB this weekend? on 05-19-2011 at 02:17 AM
World Expo of Beers in Frankenmuth, MI. My wife and I will be there Friday. It's my first time
as well and I can't wait.
Posted in thread: insulating kettle mash tun on 04-29-2011 at 06:52 AM
I'm an electric brewer so I dont have to worry about flame.
Posted in thread: insulating kettle mash tun on 04-29-2011 at 06:50 AM
It is an old Eddie Bauer down filled coat. It works well and the temp only drops a degree or
two in 90 min. The best thing is that if it gets sticky I can just throw it in the wash.
Posted in thread: insulating kettle mash tun on 04-29-2011 at 06:21 AM
I use an old winter coat. It has a zipper and snaps so I can snap it up to allow the valve to
stick out the front. I thought about cutting off the sleaves and sewing them up but I dont
think the extra...
Posted in thread: Worst Part About Homebrewing on 02-23-2011 at 08:21 AM
No one has mentioned boilovers. I know all about fermcap but it still happens from time to
time. It messes with your calculations and makes a stickey mess all over.Though it does smell
like burnt mars...
Posted in thread: Most hotly debated techniques? on 11-11-2010 at 11:29 AM
Hot side airation... Myth / Reality
Posted in thread: Cock Ale on 10-15-2010 at 08:05 AM
I've had some brew days that were long. Some brewing techniques like party-gyle and decotion
mashing are hard to get right.It looks like this cock ale is long and hard.
Posted in thread: Drip tray attached to front of keezer? on 10-12-2010 at 04:24 AM
I used a stainless steel mud pan and four magnets from lowes. The pan only says Kobalt on one
side so it looks good. I put clear packing tape on my freezer where the magnets connect so they
do not scr...