Last Activity:07-19-2014 5:47 PM
Likes Given: 1
Posted in thread: Purging necessary for rootbeer? on 04-06-2014 at 12:50 PM
I usually just cook my 3-5 gallons and pour it into the freshly cleaned corny keg. Set my psi
to 30 and wait a week. Should i let it fill and sit for a bit to settle and pull the relief
valve to let a...
Posted in thread: Root beer from keg to bottle on 12-22-2013 at 12:40 AM
I've got a blichmann beer gun and have been fighting with it for a few batches now. Spoke with
them directly and no one that works there has ever tried it on root beer. Their directions say
to use the...
Posted in thread: Root beer not force carbing...move to bottles? on 09-29-2013 at 11:34 PM
ALSO,If you're going many days between tasting, make sure you pour a 10oz glass or so for the
first glass and pour it down the drain. Then pour another glass and taste that to see if it's
Posted in thread: Kegging problems on 08-24-2013 at 03:24 AM
Your thread wasn't hijacked dude. I answered the question with the very first response. Someone
else chimed in saying they were running the same hose as their beer with the same low psi as
beer. I res...
Posted in thread: Kegging problems on 08-22-2013 at 04:12 PM
Sorry typo. I'm using 3/16 line. Maybe 5/16 on my co2 though. Can't recall. I was just making a
comment towards the previous guy saying he's running beer and root beer off a 2 tap system,
both carbed ...
Posted in thread: Kegging problems on 08-22-2013 at 02:44 AM
I don't know. Every forum I've ever read has come up with the same 25-30' of 5/16 ID hose and
25-35 psi to carb and serve. The length is to reduce foam from the high psi needed for carbing.
Maybe all ...
Posted in thread: Kegging problems on 08-21-2013 at 08:33 PM
Same rules apply to cleaning. Any soda inside the tap will turn into thick syrup and eventually
harden. I've found just a little bit inside the spigot will reak havoc on the foam. If I plug
the tap wi...
Posted in thread: Kegging problems on 08-20-2013 at 03:09 PM
Im running 25'of hose at 30psi. I get a little more foam then I'd like but not as bad as you're
sayin. I did read a thread about wintergreen helpin with head retention, but I've done root
Posted in thread: Blichmann gun and rootbeer on 07-20-2013 at 09:43 PM
Spoke with the guys at blichmann and hard to believe, but none of them have ever tried the gun
on root beer. I'm getting a ton of foam here. With my kegerator I'm running 30PSI and 30' of
line. It's w...
Posted in thread: Force carb question on 05-02-2013 at 09:56 PM
I'm on my second round of root beer. First one went well. Did enough research to get a good
understanding. I'm running 30' of 3/16 at 30 psi for carbing and serving. This second batch is