Last Activity:02-06-2013 8:55 PM
1 Likes on 1 Posts
Posted in thread: Has anyone carbed soda just like their beer? on 02-07-2013 at 01:13 AM
Make sure your line is right for this as well. I set my water to carb at 30, and let it sit for
a week. (I like my soda under carbed compared to commercially sold) I run 25 ft of 3/16th line
to help r...
Posted in thread: Serving question on 01-04-2013 at 04:51 AM
Hi I am enjoying my 2.5 gal corney keg with a barqs root beer bag in box set up. I carbonate
the water to 55psi for 2 days and I leave it as is. I don't drop the pressure at all. I'm
serving the water...
Posted in thread: Carbonation problems on 01-02-2013 at 01:41 PM
Let it carbonate for at least two days.
Posted in thread: Carbonation problems on 01-02-2013 at 01:40 PM
But then again, it's not logical that (if the liquid is fully carbonated, than one pour at 6psi
is a way to de carbonate the liquid). It might be that you are just too anxious for yummy root
Posted in thread: Carbonation problems on 01-02-2013 at 01:22 PM
When you do find the problem let us know how you solved it
Posted in thread: Carbonation problems on 01-02-2013 at 01:19 PM
I'm not sure but what if you let it carbonate for two days and not drop the gas to 6. Leave it
as is try that.
Posted in thread: Serving question on 11-19-2012 at 06:59 PM
A friend of mine told me at higher pressures her picnic tap leaks a little too. she takes it
off when she isn't serving.I use perlick faucets and they don't leak at 40 psi. Also I have
about 15 or 20 ...
Posted in thread: Serving question on 11-18-2012 at 03:24 AM
Also would like to know if I should leave the faucet connected or attach only to serve. Also if
there is another faucet that does not leak as much that is avail.
Posted in thread: Serving question on 11-18-2012 at 03:22 AM
Hi just got my new keg and been practicing using it. It is a 2.5 gal corney with a 5lb co2 that
fits in the refrigerator outside. I'm using it to serve water into syrup for sodas. What I do
Posted in thread: Kegging a La Croix? on 11-18-2012 at 02:46 AM
I'm having the same problem. I took apart the faucet flapper first to disassemble, then pulled,
and stretched the spring, then reassembled flapper last. This improves a little. But I also
want to know...
- eRIMS controller
- APA Hop schedule question
- First Year Hop Growers
- Thoughts on Dubbel recipe
- New (bigger) pot....what to do with old?
- Slim's Graham Cracker Ale 2.0
- What do you dislike about summer?
- Do you guys leave the hops in the wort while it is cooling down?
- Tony's Keezer Build
- Meat is not a protein source
- Can you guys tell me what diameter of copper tube shall I use for a manifold?