VIEW MY

Jes2xu

Gift Premium Subscription To Jes2xu

Join Date:

03-22-2014

Last Activity:

06-03-2016 11:34 PM

Age:

31 years old

Likes Given: 10

7 Likes on 7 Posts 

    ABOUT ME

  • Palmerston Nortj
  • Hobgoblin clone
  • Wheat Nog, Eddworts Haus, Hopped up blonde, Coffe Brown
  • Male
  • Married

LATEST ACTIVITY

  • Posted in thread: Mostly C02 in my beer line on 01-28-2016 at 01:25 AM
    Speed of pour sounds to me like a case of beer line length or the pressure that the gas is set
    on. The line length slows down pour speed caused by the pressure on the keg of beer. Sounds
    like you need...

  • Posted in thread: Mostly C02 in my beer line on 01-25-2016 at 02:27 AM
    From the level you describe though, I'd probably start by checking the post/poppit/disconnect.
    Thanks to the others that mentioned that too! ( is there a "karma" rating or something on this
    forum? Or ...

  • Posted in thread: Mostly C02 in my beer line on 01-06-2016 at 12:39 AM
    Regulator creep can sometimes be fixed by blowing out the prv on it. Basically disconnect your
    kegs, turn off the gas lines after the regulator if you have a valve there and crank up the
    pressure to 3...

  • Posted in thread: Mostly C02 in my beer line on 01-04-2016 at 10:25 PM
    Is it possible that the beer was carbed with a higher pressure/level than it is currently being
    served at? If so, that is the cause.If not, it sounds like a problem with the post/poppit or
    the disconn...

  • Posted in thread: Mostly C02 in my beer line on 12-30-2015 at 08:59 PM
    Good point, I had swapped them around a bunch recently to trouble shoot another problem. So
    kinda had it in my mind that I had done so for this problem. Will try that tonight and see what
    the deal is!...

  • Posted in thread: Mostly C02 in my beer line on 12-30-2015 at 08:58 PM
    Good point, I had swapped them around a bunch recently to trouble shoot another problem. So
    kinda had it in my mind that I had done so for this problem. Will try that tonight and see what
    the deal is!...

  • Posted in thread: Mostly C02 in my beer line on 12-30-2015 at 08:23 PM
    Hi all, So I cant get my head around this!! I am getting a HUGE amount of what I assume must be
    CO2 in my beer line (as I dont see any beer where it shouldn't be!) Its got to the point that
    if I leave...

  • Posted in thread: Here we go again! Rex SRC100 on 11-26-2015 at 10:38 PM
    Ok cool thanks man, I think I may go manual PWM for now, then perhaps add a cheap PID for auto
    later if I dig electric. appreciate the help!!!!

  • Posted in thread: Here we go again! Rex SRC100 on 11-26-2015 at 10:46 AM
    Ok cool, Sorry I should have clarified what I was thinking. I am trying to set up a basic EBIAB
    set up that I can then expand into a 2 vessel brew system (kinda like the brew easy I guess)
    later. So i...

  • Posted in thread: Here we go again! Rex SRC100 on 11-26-2015 at 03:31 AM
    Ok thanks man, As in you can not set a manual % power? Does this make it redundant for a boil
    kettle ?

0 COMMENTS
POST A COMMENT