Last Activity:08-16-2015 10:29 AM
Likes Given: 13
2 Likes on 2 Posts
Posted in thread: Citrosaic IIPA on 02-25-2015 at 10:50 PM
Mmmm Mmmm Good , Dry hopped in the keg while carbonating in the refrigerator 12 days only meant
for 7 but life gets in the way , I will be making this again !
Posted in thread: Citrosaic IIPA on 02-11-2015 at 09:37 PM
sternamagraph , how long did you dry hop for ?
Posted in thread: Two Roads - Lil' Heaven ? on 02-01-2015 at 03:54 PM
Any one try this beer ? - Heaven Session IPA 4.80% ABVA session IPA in a can. Made with four
exotic hops - Azacca, Calypso, Mosaic and Equinox. Taste is of tropical fruits, specifically
Posted in thread: Citrosaic IIPA on 02-01-2015 at 02:04 PM
M.O. was what I had on hand for a base grain . Next time I would like to try 1/2 m.o. & 1/2
golden promise to promote a strong malty backbone to match the hops .I'm looking forward to the
added punch ...
Posted in thread: Citrosaic IIPA on 01-30-2015 at 09:55 PM
Just did a gravity reading on this brew after 6 days in the primary fermenter at 66* , already
down to 1.014 .I will give it another 6 days to let the yeast clean up before I transfer to a
Posted in thread: Citrosaic IIPA on 01-24-2015 at 08:17 PM
Making this recipe today , bumped up 2 row to 14.5 lbs , mashing at 154* , hope it turns out
good . My 1st attempt at an IIPA & Mosaic -Citra hops
Posted in thread: Using a pump with a plate chiller on 12-11-2013 at 04:16 PM
I use a flotec 1/6th H.P. pump in my keggle h.l.t. with an ice block & water to recirculate
through my plate chiller to save on water as a plus I use the same pump as a keg washer .
Posted in thread: Switching To Keggles - Building A Brew Stand on 12-11-2013 at 03:25 PM
These are also well worth it -
Posted in thread: Switching To Keggles - Building A Brew Stand on 12-11-2013 at 03:18 PM
I like the HLt higher than the mash tun because it works on simple gravity .before the pump I
would put the boil kettle on the floor & let gravity fill the boil kettle .
Posted in thread: Switching To Keggles - Building A Brew Stand on 12-11-2013 at 03:14 PM
This pic is before I upgraded to a pump , temp controller , asco burner & a plate chiller