Last Activity:05-21-2013 3:02 PM
Posted in thread: Extended absence - Obstacles to Brewing on 01-02-2013 at 06:58 PM
The big red turn switch was on the box when I bought it. I modified the layout around the
switch and the few holes that were already cut in the box. The same goes for the inside where
the internal sid...
Posted in thread: Extended absence - Obstacles to Brewing on 01-02-2013 at 05:19 PM
Hello All,I have been brewing for many years and started a full electric (Kal clone) build over
two years ago. The project was initiated just before we found out my wife was pregnant with
twin girls. ...
Posted in thread: cutting holes in metal control box panel on 09-13-2011 at 03:00 PM
For $50-75 I would jump all over the water jet. It took several days to get everything lined
up, drill all of the pilot holes for the greenlee and jig saw out the PID, Amp and Volt boxes.
And still (I...
Posted in thread: Control Panel Build on 08-21-2011 at 01:54 PM
Looks great. I think you might have enough room for a guest bedroom in that box.What is the
round thing on the side of the box?Are you going to mount it on a wall?
Posted in thread: tri-clover removable element - brewershardware element adapter on 08-14-2011 at 03:08 AM
Kellzey,I have a greenlee 1.5" punch. Send me a PM with your address if you want to borrow
Posted in thread: Another Electric Build - Morgan Dollar Brewery on 08-14-2011 at 02:51 AM
I finally got started on the stand today. I got a bunch of stainless tubing that had already
been welded and used those to design a basic stand. My oldest Son was helping me cut the
pieces. I had neve...
Posted in thread: tri-clover removable element - brewershardware element adapter on 08-12-2011 at 01:14 PM
Man, if there was a weldless solution for the kettle ferrule, that would be perfect!Now that I
know what it takes to weld a fitting in I wish I had not spent all the money I did on weldless
Posted in thread: tri-clover removable element - brewershardware element adapter on 08-11-2011 at 06:25 PM
Posted in thread: Another Electric Build - Morgan Dollar Brewery on 08-07-2011 at 02:40 AM
Well we returned from Chicago this week and I finally got some more done on the panel. The
biggest PITA so far was cutting the holes in the control panel for the outlets. I literally
split it into two...
Posted in thread: How big is your panel? on 08-04-2011 at 08:27 PM
I searched for "nema box" This is a great buy (14x14x8) at $75 and you can offer less. The
master On/Off is like $20 new and this box has rails and other internal components you could