jCOSbrew

Gift Premium Subscription To jCOSbrew

Join Date:

02-06-2012

Last Activity:

07-02-2014 3:35 PM

Likes Given: 7

35 Likes on 32 Posts 

    ABOUT ME

  • Male
  • Married
  • Colorado Springs
  • CO

LATEST ACTIVITY

  • Posted in thread: Control Panel Schematics on 07-02-2014 at 05:26 PM
    Updates will work but is probably overkill IMO:* You don't need a relay for the pump. The 10A
    switch can directly turn power on/off for the 3A pump.* The relay/contactor on the power input
    and the ele...

  • Posted in thread: The Great Bottle Opener Giveaway on 07-01-2014 at 04:24 PM
    great prize.

  • Posted in thread: Control Panel Schematics on 07-01-2014 at 03:46 PM
    S2 wont work for Element Power, it is only rated for 10 amps.Look for a toggle switch that is
    rated for 20-30amps.Pump fuse (and wiring) will be determined by the pump power requirements.S1
    might also...

  • Posted in thread: SSVR coupled to PID/SSR on 07-01-2014 at 03:37 PM
    I have my schematic on post #4 of my build thread.

  • Posted in thread: SSVR coupled to PID/SSR on 06-26-2014 at 03:45 PM
    Duplicate Post

  • Posted in thread: SSVR coupled to PID/SSR on 06-26-2014 at 03:45 PM
    If you want to keep the PID capability consider adding a switch or contactor to power the
    SSR/PID OR the SSVR in parallel.If you want to hook them up in series you will probably need to
    run the SSVR a...

  • Posted in thread: safale o5 / harvest / slow / over wash yeast? on 06-26-2014 at 03:37 PM
    If you are not immediately repitching the yeast you should make a starter a couple days before
    you brew otherwise you will have mostly dead yeast after a few weeks.

  • Posted in thread: Whiskey barrel fake-out on 06-25-2014 at 10:47 PM
    check your LHBS for oak cubes or spirals which are typically used for wine making. They range
    from light to heavy toast.These should have better quality and results than the BBQ wood chips.

  • Posted in thread: What do I need to wire my electrical brewing hardware? on 06-25-2014 at 10:07 PM
    search for voltage resistance SSR on ebay or amazon. This device can control power to the
    heating element. Add some 30 amp switchs (or a contactor) for the the on/off function and
    10-15amp switches ar...

  • Posted in thread: Electric Heating Element Controller for 2250W Boil Coil on 06-23-2014 at 09:30 PM
    Search for Still dragon DIY controller. It is basically an SSR with a potentiometer to control
    the power to the element.

0 COMMENTS
POST A COMMENT