Last Activity:04-16-2015 12:59 PM
Likes Given: 13
10 Likes on 6 Posts
Posted in thread: The HomeBrewTalk 2015 Big Giveaway! on 04-14-2015 at 04:09 PM
In and excited to win!Thanks, sponsors!!!
Posted in thread: Brewer's Hardware 15 Gallon Stainless Steel Conical Fermenter Giveaway! on 08-01-2013 at 01:33 PM
Posted in thread: Valve on bottom of boil kettle? on 06-05-2013 at 02:41 AM
Thanks for all the replies and advice! Impressive looking setup CladiusB! Makes me want to get
medieval on my brew rig!Cheers!JB
Posted in thread: Valve on bottom of boil kettle? on 05-29-2013 at 10:14 AM
I've been considering adding a valve and false bottom to one of my boil kettles to make it
easier to transfer wort to the fermenter and filter out leaf hops when i use them.. Other than
having to use ...
Posted in thread: HomeBrewTalk 2013 Big Giveaway! on 02-09-2013 at 02:15 AM
In! This is friggin awesome!
Posted in thread: Stout Issues on 01-31-2013 at 12:02 PM
My stouts and porters usually go from meh to wow somewhere between 2 and 3 months in the
bottle. They are slow to mature and when they do it seems to be like flipping a switch. JMHOI
made an oatmeal s...
Posted in thread: Rubbermaid mash tun! on 01-15-2013 at 07:57 PM
Yeah, I have cranked down on it pretty hard, but I have also read on here that over-tightening
will cause leaks too, so I don't want to get it too tight. I filled it with hot water and let
it sit for ...
Posted in thread: Rubbermaid mash tun! on 01-15-2013 at 07:48 PM
Thanks, I will try your o-ring between the washer trick. I currently have 6 washers on the
outside and 2 on the inside, along with the stock rubber gasket and it still has a little too
much flex in it...
Posted in thread: Rubbermaid mash tun! on 01-15-2013 at 11:48 AM
How snug does the valve/nipple fit in that cooler? I just built this a couple of weeks ago
using the 3/8" fittings and there is a lot of "play" in the valve assembly. Just sitting full
it doesn't leak...
Posted in thread: Rubbermaid mash tun! on 01-14-2013 at 10:13 PM
I jsut bought a 3/8" lead-free brass ball valve from Home Depot not more than 7 days ago. Guess
there must be either a really high demand or no demand in your area.Funny you say that. I
checked on the...