jblewis

LATEST ACTIVITY

• Posted in thread: Need help with new HLT setup (sorry Long) on 05-02-2008 at 01:45 AM
  ooo it is 13.2 gallons it says 50L on the side 50L=13.2086 gallons. HA damn metric systemweak
  though now i have 2 less gallons after doing all the conversion

• Posted in thread: Need help with new HLT setup (sorry Long) on 05-02-2008 at 01:35 AM
  HMM didn't know they exist. it measures 21 1/4 inches high( from top to bottom including
  handles) and 15 3/8 inches diameter. OD. It is from interbred if that means anything to anyone.
  it looks like a...

• Posted in thread: Need help with new HLT setup (sorry Long) on 04-30-2008 at 01:07 AM
  I recently added a sight tube to my keggle and after i finished marking it seemed to only hold
  13.5 gallons for a 15.5 gallon keg.I have a drop tube that goes to the bottom of my keg and
  leaves about ...

• Posted in thread: stuck mash trying to find problem on 04-22-2008 at 12:19 AM
  I cant find any copper crosses locally for the copper manifold so i am thinking a square CPVC
  one in a circular 10 gallon mash tun. on the CPVC ones do you just press fit them together or
  is the glue ...

• Posted in thread: stuck mash trying to find problem on 04-21-2008 at 07:19 PM
  sorry picture didn't work I fixed them

• Posted in thread: stuck mash trying to find problem on 04-21-2008 at 07:04 AM
  on Saturday i was brewing a 10 gallon batch with 20# grain and i got stuck mash for the first
  time.There are allot of factors that might contribute to this,1. my lhbs closed recently so
  this made me m...

• Posted in thread: Rusty chest freezer on 12-08-2007 at 06:34 PM
  no it doesn't leak it just build up lots of moisture on the sides.does any one know of a
  product to paint on the inside that is very water resistant.

• Posted in thread: Rusty chest freezer on 12-08-2007 at 04:02 AM
  I have a freezer that i use as a kegarator. It started rusting like crazy inside. I have sanded
  all the rust away( hours of work) and sprayed the inside with high performance enamel by
  rustola. is the...

• Posted in thread: Bad Brewing Techniques on 12-08-2007 at 03:33 AM
  1.pour boiling water into a carboy2. put carbay with hot water in snow to cool3. put a small
  blow off tube in an ail lock spot, ( BAM!! EXPLOSION IN MY CLOSET)4 Dont check to see if mash
  tun for leaki...

• Posted in thread: Keggle Aluminum Vs Stainless Steel on 11-10-2007 at 01:37 AM
  i am trying to find out if my keg is aluminum or ss as well . i used a plasma cutter to cut the
  top off and it weighs 24 pounds now. and the top was 2 Lbs 10 ozis that 29.7 pounds for
  aluminum or ss k...