jay4e

LATEST ACTIVITY

• Posted in thread: Will this work on a Paintball tank? on 08-15-2010 at 02:42 PM
  kegconnection.com has the whole set up for $55. you dont already have a regulator its
  probably worth it to just buy it all there.

• Posted in thread: Price surge comming to US? on 08-12-2010 at 09:28 PM
  fortunately here in the boston area there is a lot of competition for craft and micro brews,
  and it tends to keep prices of good beer down. But in all honesty i wouldnt mind paying a small
  increase at...

• Posted in thread: New keezer vs. new fridge on 08-06-2010 at 12:42 PM
  if you want 5 kegs, a 5lb and a 10lb tank i would go with the 14cf. you can find 9 cf that
  should certainly fit 5 kegs and a tank (collar might be necessary depending). But it is up to
  you to weigh th...

• Posted in thread: Scrap Value on 08-01-2010 at 03:02 PM
  i suspect you will likely get around $20 bucks for the keg. the problem is finding a place you
  can bring it to and getting a decent deal. assuming a keg weights 25-30 lbs empty, and you can
  get 70-80c...

• Posted in thread: Craigslist find - should I buy? on 07-30-2010 at 12:34 AM
  looks like a decent deal. you can probably find a use for or sell the sanke, and converting the
  lines isnt too hard. but if its a full co2 and nitogen systems (ie tanks and regulators), and
  you want n...

• Posted in thread: upgrade from 1 keg to 2+ kegs on 07-26-2010 at 06:30 PM
  planing for the future is a good idea. though it is not to difficult to add a 3rd tap yourself
  down the road if you get a 3" tower. you can drill it out yourself or get an extension cap with
  another t...

• Posted in thread: Door Mounted Faucets on Mini Fridge on 07-25-2010 at 06:39 PM
  you may be able to put the shanks high enough to clear the top of the kegs, depending on the
  internal height. or you could keep the shank to the center or sides of the door where the kegs
  are not stic...

• Posted in thread: Kegs and my Future bar on 07-22-2010 at 08:25 PM
  for cooling i would try just run the lines through a pvc pipe, with some cheap pipe insulation.
  shouldnt cost more than $10-15 for 10-12 feet.if that doesnt work well enough for you could
  invest in a ...

• Posted in thread: PSI for different beers??? on 07-22-2010 at 02:15 PM
  all else being equal browns and stouts should have lower carb levels, which would equal lower
  psi. two things i can think of would cause homebrew to require higher psi however.first is co2
  absorption....

• Posted in thread: buying/building a tap tower onto my chest freezer on 07-19-2010 at 08:33 PM
  if it was me and i really wanted 4 taps, i would likely go with a 2 x 2 tap setup. just seems
  easier to manage two taps per tower than dealing with all 4 in one. also since its a chest
  freezer i dont ...