Last Activity:01-16-2014 6:05 PM
Likes Given: 8
4 Likes on 4 Posts
Posted in thread: Frozen Keg - Johnson Controls A419ABG-3C on 01-16-2014 at 05:48 PM
Can I get some input on putting the probe in a bottle of water vs in the open air?When I tried
the bottle of water, it took the water way too long to cool / warm and I found there were
bigger swings i...
Posted in thread: Frozen Keg - Johnson Controls A419ABG-3C on 01-16-2014 at 04:02 PM
The temperature sensor was inside the lid, vertically even with the wood collar that I built
but not in direct contact with the sides of the keezer.
Posted in thread: Frozen Keg - Johnson Controls A419ABG-3C on 01-16-2014 at 12:56 PM
I have made a keezer from a 7 cubic foot chest freezer. I ran the keezer empty for about one
week to make sure the temps were ok. With SP = 45 degrees, there were some small swings in
Posted in thread: Temperature controller on 07-15-2013 at 09:28 PM
I am looking for simple, even if it means spending a little more money. I do not want to have
to wire anything or take my freezer apart to get this project done.I am looking for a
controller for a che...
Posted in thread: Beginners follow the advice from the experts!!! on 07-26-2012 at 05:18 AM
Hard to imagine that the veterans know what they are talking about... Good to see you paid
attention and it paid off.
Posted in thread: Boil Pot? on 07-26-2012 at 05:15 AM
Go stainless from the start. Buy as big as you can afford. I am not a fan of partial boils.
Posted in thread: Can time cure skunking problems? on 07-16-2012 at 02:59 AM
For what it is worth, I bottled June 24. 3 weeks. I will wait another 3 weeks and give it a
Posted in thread: Can time cure skunking problems? on 07-16-2012 at 01:31 AM
In my first carboy fermentation, I did not put a cover over my carboy because I didn't know
better. It was only after a read a post about this that I covered it. It was probably without a
cover for a ...
Posted in thread: First non Mr. Beer batch...disappointed on 07-11-2012 at 04:06 AM
Keep it in a dark closet for up to 3 additional weeks and try it again. Patience is the key to
great beer. Don't "waste" bottles by Trying them too soon.
Posted in thread: What do you do for a living? on 07-11-2012 at 04:02 AM
Just curious to see what your professions are out there. No need to be specific about where you
work.I will start.Civil engineer