Last Activity:09-14-2015 11:54 AM
Posted in thread: Batch Sparging Higher Gravity Beer Question on 09-11-2015 at 02:30 PM
More water, More Crush, those are your other two options. if you line your mashtun with a bag,
you can crush pretty fine.I do think I may have some more room to crush a little finer. I
hadn't done tha...
Posted in thread: Batch Sparging Higher Gravity Beer Question on 09-11-2015 at 02:02 PM
I had not thought of this before. Recently, for most medium sized beers, I've been doing one
batch sparge infusion (equal to what I need to hit my pre-boil volumes after the first
Posted in thread: Batch Sparging Higher Gravity Beer Question on 09-11-2015 at 01:43 PM
OK, so yes, the higher amount of grain is because I scaled the recipe up to 5.5 gallons. Here
is my process:1. Mashed in with 18.75 pounds of grain and 6.75 gallons water2. Mashed for 60
minutes with ...
Posted in thread: Batch Sparging Higher Gravity Beer Question on 09-11-2015 at 12:25 PM
Thanks guys. I really appreciate you all helping me work through this. I'll post the specifics
once I get to work and have my laptop. I'm pretty sure the difference in the grain is because I
Posted in thread: Batch Sparging Higher Gravity Beer Question on 09-11-2015 at 04:16 AM
I did not leave any second runnings behind. I usually mash in at 1.4 qts/lb of grain since I
recirculate the mash with a pump. I then drain first runnings and do a single batch sparge. I
stir the heck...
Posted in thread: Batch Sparging Higher Gravity Beer Question on 09-10-2015 at 03:09 PM
Hi All. Forgive me if this has been asked before but I couldn't necessarily find what I was
looking for with a search. Here's the situation: Last weekend I brewed Mr. Denny Conn's Bourbon
Posted in thread: Looking for Advice Re: Pumpkin Stout on 08-22-2015 at 12:37 PM
Pappers,I actually set out to try and clone this beer a few years ago based on the information
that was provided on Elysian's site. I've never actually tasted it side by side with the Dark
O' The Moon...
Posted in thread: Barley Crusher Customer Service on 11-10-2014 at 04:47 PM
Hi All,I had seen some negative experiences regarding Barley Crusher's customer service, and I
just wanted to add a recent experience. One of the set screws on my BC mill had the head break
off. It se...
Posted in thread: Natural Gas Question on 10-26-2014 at 12:07 PM
I just hooked my brew stand up to natural gas and it runs three blichmann burners very well.
You do need a hose with quick disconnect. I bought the 1/2 ID model here: it's more expensive,
but it feel...
Posted in thread: Count Chocula Beer......... really? on 10-25-2014 at 12:36 PM
There was an issue of BYO a few years ago that had recipes for brewing with different cereals.
I can't remember which one it was exactly, but a friend tried the one with crunch berries.