Gift Premium Subscription To huntb

Join Date:


Last Activity:

09-01-2015 12:31 PM

Likes Given: 27

19 Likes on 17 Posts 


  • Electrical Engineer
  • Male
  • Single
  • Grand Haven
  • Michigan


  • Posted in thread: MPX5010 Volume Sensor on 08-27-2015 at 06:51 PM
    This application note may help:AN1646Are you fabbing a PCB? You could try testing with a
    breadboard first

  • Posted in thread: Jimmy's 15 Gallon eBIAB Build on 08-27-2015 at 12:36 PM
    Oooohhh me likey

  • Posted in thread: eBAIB Build on 08-24-2015 at 12:02 PM
    Sure, makes sense for your plastic enclosure. The screws have some meat to create its own
    thread in the plastic. Not sure it will hold things so well with a thin metal enclosure
    wall.Use a machine scr...

  • Posted in thread: New Control Box Build - Need assistance on 07-21-2015 at 03:12 PM
    What is that red circle you have drawn? I assume it is a relay coil or your buzzer, but it
    isn't labeled. Make sure if you are fusing or using a circuit breaker for your PID's (not a bad
    idea) that yo...

  • Posted in thread: My 2013 Belgian Wild Ale on 07-20-2015 at 01:00 AM
    I brewed my first wild ale back in 2013 using extract and specialty grains. I have been testing
    it every 4-6 months or so and the beer is constantly changing (for the better!)I'm having one
    tonight, 2...

  • Posted in thread: My eBIAB Basement Build on 07-13-2015 at 11:43 PM
    do an autotune on your PID and that 1.3 degrees will become less than 1I've heard that the
    autotune for the MyPIN's doesn't work the best so I am trying to stay away from that for now.
    Unless you have...

  • Posted in thread: My eBIAB Basement Build on 07-13-2015 at 06:38 PM
    Finally got time this weekend to test the temperature control and install my plumbing with
    inline water filter. I filled the pot with 9 gallons of 65F water and raised it to 152F in
    about 20 minutes, ...

  • Posted in thread: Getting Mypin TD4 into and setting Manual Mode on 07-12-2015 at 10:54 PM
    The search function and google was how I learned to wire up my temp probe as I had a TA7 before
    the the directions were wrong..One more thing you may or may not care to do.... I was having

  • Posted in thread: Calibrating MyPin TD4s on 07-10-2015 at 01:11 PM
    Thanks,You think the closer the better? I'm going to try moving it to the outlet first, should
    be a pretty simple solution. Cause ultimately, its the temp of the wort leaving the tube that I
    care most...

  • Posted in thread: how do I get this pt100 into my HLT? on 07-08-2015 at 12:49 PM
    I just responded to the last comment before mine :) it was current and at the top of the list
    when I did so... Thant my story and I'm sticking to it :tank:Haha fine! You get a pass today


Newest Threads