Last Activity:04-28-2016 11:09 PM
Likes Given: 1
1 Likes on 1 Posts
Posted in thread: 2 BBL Stout Tank Brewery $4000 on 04-28-2016 at 11:37 AM
Thanks! The false bottom came with those bolts in it, I assume it is either to help support the
center of it from collapsing under the weight of the grain and/or to allow you to adjust it up
Posted in thread: 3 BBL Stout Tank HERMS Brewery Questions on 04-28-2016 at 03:44 AM
I have done some 2 BBL batches and the mash temp only drops 2 or 3 degress over an hour,
depending on weather. With insulation I'm sure it would be better, but this is good enough for
me for now. I'm ...
Posted in thread: 2 BBL Stout Tank Brewery $4000 on 04-28-2016 at 02:36 AM
I am selling my 2 BBL equipment. I have brewed around 10 1bbl and 2bbl batches on this setup. I
also have a 10gal brewery as well, I am wanting to sell this and build a dedicated 1bb brewery
for all m...
Posted in thread: Dual 120v, 4 elements, 3 pumps, control panel help! on 10-05-2015 at 03:47 AM
Thanks so much for the input! Another question as far as receptacles for the heating elements
and pumps, can I use a basic 2 outlet receptacle, cut the connecting tabs between the 2 hots
and 2 neutral...
Posted in thread: Dual 120v, 4 elements, 3 pumps, control panel help! on 10-03-2015 at 04:11 AM
307159This is what I'm thinking so far for controlling heating elements 1 and 2 (in the HLT
during the mash) and heating elements 3 and 4 (in the BK). Does this look somewhat sane so far?
Posted in thread: Dual 120v, 4 elements, 3 pumps, control panel help! on 09-27-2015 at 04:32 AM
I don't have access to 220/240v where I brew, I mostly brew using 2 elements on different
circuits and have been for some time now. Every now and then I will do a larger brew (up to 2
bbl) using my st...
Posted in thread: New bigger equipment: Stout Tanks on 03-20-2012 at 12:45 AM
There are about 10 or so of us that brew, I've only done one 15 gal and one 20gal batch on it
so far, the second batch was a pale ale and went much smoother for the most part, on the first
Posted in thread: New bigger equipment: Stout Tanks on 03-19-2012 at 11:22 PM
Thanks, he's a German shepherd, a lot of people think he's a Belgian I think because he's
darker than most German shepherds, he's about a year old in the pics
Posted in thread: Quick disconnect temperature sensor for BCS460 on 02-15-2012 at 05:31 AM
I just got in my M8 panel mounts and have a question, how am I suppose to attach the wires from
my BCS460 to the prongs on the inside of the M8 mounts. Is there some kind of plug I need to
put on the ...
Posted in thread: Stout Tanks and Kettles brew rig (photos) on 01-18-2012 at 02:57 AM
2 bbl system