Last Activity:03-23-2014 11:39 AM
2 Likes on 2 Posts
Posted in thread: PVC Tower Cooling Solution on 02-22-2014 at 10:24 PM
Yeah. Can't speak on the cooling since I have a remote glycol setup but even when I had my
keezer I never ran less than 10' of line and always had a perfect pourSent from my iPhone using
Posted in thread: Decent source for Natural Gas supply Hose on 01-30-2014 at 02:12 PM
I know I'm bumping a super old thread BUT, I just wanted to let everyone know I am still using
my natural gas flex line and it's still in perfect shape. I actually run a 80,000 btu forced
hot air furn...
Posted in thread: Super Simple 15G Plastic Conical on 01-28-2014 at 07:35 PM
This just seems the simplest and cleanest, definately air tight. To each their own175441
175440$6 for the lid gasket and $1 each for the bungee cords. And yes I'll be doing a blow off
Posted in thread: Super Simple 15G Plastic Conical on 01-28-2014 at 02:16 PM
That's looks pretty good, but having taken the bottom "attached" ring off and seen the gap
under it I would still be a little worried. that gasket will seal it I'm sure but you will
still get crud und...
Posted in thread: Super Simple 15G Plastic Conical on 01-26-2014 at 04:41 PM
I have never needed a blow off tube with 11 gallons in there.Is yours sealed air tight?
Posted in thread: Super Simple 15G Plastic Conical on 01-26-2014 at 03:13 PM
Finally putting my 15 gallon conical together. I opted to seal the lid by removing the inner
ring the lid screws onto. I put two strips of the rubber "D" style on the lid and I will strap
it down. See...
Posted in thread: DIY glycol cooled tower for remote tap setup?? on 10-30-2013 at 02:01 PM
Okay, I've been looking for a couple hours and havent really found what I'm looking for. I'm
just wondering if anyone has a cheap/effective way to insert some sort of glycol cooling into a
Posted in thread: Super Simple 15G Plastic Conical on 03-09-2012 at 09:34 PM
Yup that would work. Or you could just not fill it and not worry about it. A lot if people on
here are a little over anal. Not a bad thing for brewing but I'm just saying.