Last Activity:04-19-2015 9:24 PM
Likes Given: 1
Posted in thread: My Brewday: Brewing an Altbier for December on 09-28-2012 at 03:53 AM
HSA is a non issue. You would boil the beer anyway, and if you are pitching the appropriate
amount of yeast its not a problem.
Posted in thread: always getting diaceytl on 07-08-2012 at 02:38 AM
Consult Mr. Malty, if you used a stir plate you could get away with a much smaller starter for
a 1058 lager assuming you used at least 2 packs/vials of yeast. I agree with Denny, always need
Posted in thread: always getting diaceytl on 07-08-2012 at 02:32 AM
What was your mash temp? I usually go for 150-152 to end up with some sweetness and residual
body, this could be what your tasting in your beer. A true diacetyl test involves heating up a
sample to 15...
Posted in thread: Keggles in Austin Tx on 06-17-2012 at 11:37 PM
I have 3 cut keggles, no ball valve but with a 7/8" opening and the lid removed for $60, and 1
full outfitted keggle with ball valve, bulkhead, dip tube and 1/2" barb for $125. Dont have
time for a fu...
Posted in thread: Kegerator lost power on 04-12-2012 at 02:16 AM
That is what I shall do, going to let it get cool again and hopefully wont have to mess with
the carb levels.
Posted in thread: Kegerator lost power on 04-12-2012 at 02:04 AM
So I attempted to poor a beer tonight for my dad, went into the kegerator and the freezer was
73.6deg F! All the beer is still under pressure but room temp. Turns out the power connection
inside the r...
Posted in thread: Where can I buy grains by the ounce?!?! on 10-24-2011 at 02:44 AM
Austin Home brew supply, best way to go.
Posted in thread: Wrong **** voltage aquarium temperature controller -> Pay if forward on 07-25-2011 at 11:25 PM
I just did the same thing, if someone will pay shipping its yours.
Posted in thread: 10 20# Co2 cylinders Richmond Va, Tidewater Va on 06-30-2011 at 03:22 AM
Any tanks left? If so Im interested, how much to ship to 78748?Don
Posted in thread: Oops on 06-14-2011 at 03:13 AM
So I just finished making a Winter Ale using some oak chips. I searched through some extra
parts I had laying around and found what I thought to be a stainless steel reducer. I used this
to weight dow...