Last Activity:08-28-2015 3:43 AM
Likes Given: 1
16 Likes on 13 Posts
Posted in thread: Coldbreak Brewing Herms Giveaway! on 07-28-2015 at 03:51 PM
Posted in thread: HomeBrewSupply Amcyl Brew Kettle w/ 3-Piece Ball Valve Giveaway! on 07-28-2015 at 03:49 PM
Let me in!
Posted in thread: Sufficient cleaning regimen for Perlick 525SS on 07-16-2015 at 02:10 PM
I broke down one of my Perlicks after a year of use to soak and clean everything good only to
find it was spotless. I, like the other, run BLC and hot water though the lines and faucets for
Posted in thread: BCS 460 Temp probes on 04-27-2015 at 04:28 PM
I re-did the wiring on mine while making them a little longer. No problems. It will probably
effect the calibration since the length of wire has an effect, but it is fairly simple to
recalibrate the n...
Posted in thread: Basement Electric Brewery Under Construction on 04-06-2015 at 01:35 AM
Posted in thread: Keggle HLT and MLT drain orientation on 03-20-2015 at 03:11 PM
I always thought people were making sure they don't reduce flow by using non barb quick
disconnects/camlocks etc?? You definitely do not want to reduce flow to your pumps. So if this
is before the pum...
Posted in thread: Electrical Question for New Shed/Home Brewery on 03-13-2015 at 02:28 PM
Yes, sorry. I re-read the post and I guess I read that last question out of context. As long as
you upgrade the wire, swapping the breaker shouldn't be a problem, as soccerRef said.
Posted in thread: Electrical Question for New Shed/Home Brewery on 03-13-2015 at 01:14 PM
It shouldn't be a problem to replace the 30 amp breaker in the box in my house with a 60
amp?This should be a big no no unless you can confirm that the 30 amp circuit was wired with 6
gauge, which I d...
Posted in thread: upright 9 tap with raspberry pints finally done on 03-11-2015 at 07:11 PM
Posted in thread: The HomeBrewTalk 2015 Big Giveaway! on 03-11-2015 at 04:13 PM
Let me in!