Last Activity:03-21-2016 9:57 PM
4 Likes on 4 Posts
Posted in thread: Homebrew Supply Keg System Giveaway on 03-01-2016 at 01:29 PM
Would love to win a kegging setup. If not the all-grain zombie dust close would be cool.
Posted in thread: american stainless conicals from PA on 12-18-2015 at 07:49 PM
I agree I am also confused? did they change the design or something? I found that only 10-12ft
of the discharge hose would be more than plenty to work effectively I used about 15-17 ft and
found the t...
Posted in thread: american stainless conicals from PA on 12-17-2015 at 03:44 PM
Thanks for the quick reply. When I got home from work I finished putting the conical together
and realized that the legs extend up almost all the way to the lid. So the hose will have much
Posted in thread: american stainless conicals from PA on 12-16-2015 at 11:40 PM
I just got my first conical and have been reading through this thread and trying to learn about
cooling. I like the idea of the wrapping the flat hose and then insulating around the outside.
I am tryi...
Posted in thread: HomeBrewSupply Amcyl Brew Kettle w/ 3-Piece Ball Valve Giveaway! on 07-28-2015 at 02:04 PM
Posted in thread: HomeBrewTalk 2012 Big Giveaway on 02-07-2012 at 12:44 AM
Sweet, I want to win.
Posted in thread: Natty Never Tasted this good! on 08-16-2011 at 02:24 PM
First, that keg appears to have been in good shape before you stole it and made it unusable as
a keg. Second, using a lid on the stolen keg is not a good idea and you should find another way
to keep d...
Posted in thread: Plasma Cutter ~ Cutting Kegs on 07-28-2011 at 08:34 PM
Saws-all worked great for me!! short metal cutting bit, clean smooth line, happy happy boil
kettle. I did it this way because everyone I talked to wanted to charge $70+. Had it done in a
half an hour,...
Posted in thread: Guide to set internal chest freezer thermostat to >32F; Eliminate external control on 07-21-2011 at 10:24 AM
I would say the second pic. Try to find where the thermocouple attaches. In the second pic if
that is where the dial attaches to fine tune the temp for normal operations them that is where
the course ...
Posted in thread: Guide to set internal chest freezer thermostat to >32F; Eliminate external control on 07-20-2011 at 10:25 PM
I wanted to try this out and was wondering where the screw is going to be. I have two little
boxes with wires going into them. One on the compressor(first pic), and one all alone(second
pic). Which on...