VIEW MY

HDbrewer

Gift Premium Subscription To HDbrewer

Join Date:

09-04-2012

Last Activity:

12-16-2012 11:38 AM

LATEST ACTIVITY

  • Posted in thread: My DIY grain mill on 11-29-2012 at 12:03 PM
    The two knobs that stick out rotate within the frame. They are locked in place with a set screw
    to keep them from rotating after you set the gap. Inside those knobs, there is a hole machined
    in .035 o...

  • Posted in thread: My DIY grain mill on 11-29-2012 at 12:02 PM
    Hi HDBrewer, the mill looks good :). I'm in the process of making one myself. Even am not sure
    how the eccentrics work for adjustments. Can you post a few more pics of the plates with the
    bushing/bear...

  • Posted in thread: My DIY grain mill on 11-29-2012 at 11:58 AM
    I finished up the hopper last night. I just used some scrap plywood that I had left over from
    another project. Overall I am very happy with this project.

  • Posted in thread: My DIY grain mill on 11-16-2012 at 01:09 AM
    It does. The knobs that stick out are the eccentrics. They are simple to make. You just machine
    the bore for the bushing off center. Then the knobs rotate in the frame itself. The long bolts
    that stic...

  • Posted in thread: My DIY grain mill on 11-16-2012 at 12:37 AM
    How are you doing the knurling? I wouldnt mind building my own if I could find shafts.The
    knurling is done with knurling rollers on a lathe.

  • Posted in thread: My DIY grain mill on 11-16-2012 at 12:36 AM
    Wow, nice! :mug: I'd be interested to hear more about how you sourced materials, how you did
    the machining, final cost, etc. Is is adjustable? Looking forward to seeing the results of the
    milling.All ...

  • Posted in thread: My DIY grain mill on 11-15-2012 at 06:14 PM
    Just finished up the machining on my DIY grain mill. I just need to get a base and hopper made
    for it now. Hopefully, I will get some free time this weekend and can finish it up!

  • Posted in thread: Help with a kegerator on 11-10-2012 at 01:13 PM
    I would run copper pipe inside the PVC and run your beer lines in the copper. That is how I ran
    my tower and used spray foam to insulate.

  • Posted in thread: Kegerator Conversion with Danby DAR440BL? on 10-16-2012 at 02:09 AM
    I tried two 1/6 barrels lat night. It was a no go even after removing the molded in shelf
    ledges. Just not quite wide enough.By any chance you think a 1/6 barrel and a ball lock will
    fit?

  • Posted in thread: Igloo 4.6 Cu Ft Kegerator on 10-14-2012 at 01:51 AM
    I too thought about purchasing the same fridge. Can you share any pics with us?

0 COMMENTS
POST A COMMENT