Last Activity:06-09-2013 1:17 PM
2 Likes on 2 Posts
Posted in thread: My 1 bbl. system build on 05-06-2013 at 09:19 PM
Can you show this exact shot with the copper plate removed? I'm just wondering how the inside
surface looks after being welded with that plate instead of being backpurged.Thanks! this
Posted in thread: My 1 bbl. system build on 05-06-2013 at 09:15 PM
Because the pump outlet is 1/2" and the valve is 1" the 90 degree bend is probably the lesser
restriction. The same is also likely for the inlet as that is 3/4" but I'll watch the pump
operation when ...
Posted in thread: My 1 bbl. system build on 05-03-2013 at 12:51 AM
The back-ordered fittings finally arrived. Couldn't resist setting up the valves and hose barbs
on the Chugger pump. I'm thinking I might put the pumps on pullout trays. This should provide
Posted in thread: My 1 bbl. system build on 04-29-2013 at 08:52 PM
Installed the connector from the spa panel to the power distrubition box. Began the wiring of
the terminal block to the breakers and fuse holders.
Posted in thread: My 1 bbl. system build on 04-07-2013 at 02:39 AM
Saved up the "pennies" over the winter and just got some new goodies to continue the build.
Will be mocking up the pumps and installing the pump supports. Still have some welding on the
Posted in thread: (2) 200L (52 gal.) tanks w/covers on 03-27-2013 at 12:36 AM
Thanks to those of you that inquired, but the kettles have been sold. They are off to a good
home in sunny California.Thanks again Doug
Posted in thread: (2) 200L (52 gal.) tanks w/covers on 03-19-2013 at 01:42 AM
I'm lowering the price to $350 ea. Spring cleaning time.
Posted in thread: (2) 200L (52 gal.) tanks w/covers on 09-17-2012 at 02:00 AM
Two 200L (52gal.) tanks w/covers for sale. These are 14ga. stainless with dish bottoms. Could
be used as direct fire kettle, MT, HLT or a fermenter with a little work. Asking $450 ea. Local
Posted in thread: My 1 bbl. system build on 09-17-2012 at 01:02 AM
So maybe I took a little longer away then planned. But back on the project. I am installing a
spa panel on the side of the power distribution panel. Also relocated the filters to the rear
of the frame...
Posted in thread: Expandable Control Panel Advice on 07-10-2012 at 04:57 PM
If your future plans are to increase to 1-1/2 bbl. then consider building at least a 60A
capacity panel. I am using two panel boxes so everything isn't crammed in and it allows for
easier expansion. J...
- 1.75 gallon keg
- Does steeping oak chips affect fermentation?
- Jet burner question
- guess this beer bottle
- Five different melomels - *Picture*
- Stone Enjoy By 07/04 & RuinTen
- Keg cooling question
- WLP002 - What the heck?!
- Yes, Virginia, fermentation temp control really IS important.
- SWMBO Mildly Irritated on Brew Day
- Fermentation temperature schedule US-05