Last Activity:10-18-2015 12:38 AM
1 Likes on 1 Posts
Posted in thread: Ever try this? on 03-13-2015 at 01:53 AM
the only way i would use that is if it could be taken apart with the screws and check to see if
there is any GREESE at the impeller bering and clean & sanitize it first
Posted in thread: 1-Gallon Brewers UNITE! on 01-27-2013 at 05:31 AM
if that's the case i could make fun of all you 5 gal brewers because my pot is big enough for
12 gal but i wont .
Posted in thread: Cleaning plastic tubing? on 11-15-2012 at 03:34 PM
i would use a long piece of tie wire with a small cloth looped and smashed on the end. soak the
hose in a bucket of cleaning solution first .
Posted in thread: Remember to aerate! on 08-31-2011 at 03:35 AM
what i do is when the wort is cool i will pour it into the primary then back into the pot ,
back into primary i do this a few times without any issues i have done it this way for years.
Posted in thread: Raw milk from local farms/ ranches on 11-07-2010 at 02:46 AM
what the feds don't know wont hurt you ---don't get caught.
Posted in thread: How much evaporation to account for? on 11-03-2010 at 12:52 PM
i start off with 9.5 to get 8 gallons for a 60 min boil
Posted in thread: Blow off tube help on 10-04-2010 at 02:01 AM
i use a length of tie wire with a small piece of cloth attached to the end
Posted in thread: can I cut stainless steel washers with hacksaw? on 08-06-2010 at 03:22 AM
it could probably be done but i would not recommend it, i work with stainless steel all the
time . you will spend hours and maybe a couple blades.
Posted in thread: It's My Birthday!!! on 07-24-2010 at 01:32 PM
i just turned 50 july 20 th. , i retired last year for about 6 mo. i got bored so i went back
Posted in thread: Dealing with Trub when Kegging on 06-13-2010 at 11:30 PM
i use a standard paint strainer you can get from lowes or home depot , sanitize it first and
put it over your auto siphon. i have been doing it this way for years