Last Activity:10-02-2014 3:01 AM
Posted in thread: Camlock - type C on 02-02-2013 at 04:40 PM
Here it is, enjoy!PS: The male and female camlock is connected to show they are not parallel!
Posted in thread: Camlock - type C on 02-02-2013 at 03:43 PM
Cheers,This might sound like a dumb question, but in your experience, do all your female 1/2''
camlocks (Type B, C, etc.) have two arms? Or have you found camlocks with only 1 arm?A company
from here ...
Posted in thread: Bad News Brewery - Control Panel on 01-15-2013 at 06:59 PM
Cheers,Great set-up, it's inspiring!How big is your box in order to fit all this stuff?Thanks.
Posted in thread: DIY PID controller - beginner Arduino project on 09-16-2012 at 11:09 AM
Sometimes simple solutions are better suited to simple problems... I am sure the PID library
must be well suited to complicated processes, but it looks like in this case your if's are a
far better sol...
Posted in thread: Where to place an on/off switch - 5V circuit or 230V circuit? on 08-19-2012 at 07:02 PM
Thanks for the answer. I think I'll use contactors eventually to control high amperage.
Posted in thread: Where to place an on/off switch - 5V circuit or 230V circuit? on 08-15-2012 at 05:32 PM
Cheers,I am designing a PID based on Arduino for an electric brewing system.I will use the 5V
circuit Arduino provides to trigger an SSR that will let high-voltage (230V as I'm in Europe)
go through t...
Posted in thread: Electric brewery plans - need help on 07-26-2012 at 05:34 PM
By the way I have never liked the method of purposefully leaking some current to ground to trip
the GFCI as a E-stop, it just seems wrong to me to count of something that should be a
Posted in thread: How many gallons of homebrew in 2010? on 12-10-2010 at 09:04 AM
5 gallons Very-bitter-starter-kit4 gallons APA3 gallons Sweet stout5 gallons Too-clear-Porter5
gallons Hopefully-even-better sweet stout=34,003 gallons Well... hopefuly quality will increase
Posted in thread: New to Brewing on 06-07-2010 at 07:56 PM
I don't secondary unless I'm making a very strong beer, or unless I want to dry-hop or add
fruit. It's just an unnecessary step IMO.My turn to ask a question. Why do you need a secondary
Posted in thread: New to Brewing on 06-06-2010 at 06:12 PM
I agree with guindilla a bit but I usually do a 3 week primary 3 week bottle condition formula.
If you can wait longer than 3 weeks once in the bottle it is better but waiting is the hardest
thing to ...