VIEW MY

gromfy

Gift Premium Subscription To gromfy

Join Date:

09-03-2011

Last Activity:

07-28-2012 2:33 PM

    ABOUT ME

  • Single
  • orange
  • CA

LATEST ACTIVITY

  • Posted in thread: Chudnow wall-mount soda dispenser on 05-08-2012 at 03:15 AM
    Hey, gang. I'm looking for a vendor for a Chudnow 152S wall-mount faucet for a home seltzer
    system.Kegman has some similar faucets (possibly Chudnow), but they have syrup lines. I need
    this for seltze...

  • Posted in thread: "Hacking" a Cornelius Venture Pre-Mix Soda Dispenser on 10-11-2011 at 02:29 PM
    The alternative that I did not describe well would be to allow for a glycol line to be run next
    to your seltzer line. The glycol would keep the seltzer cool all the way to the tap. To do
    this, you'd e...

  • Posted in thread: "Hacking" a Cornelius Venture Pre-Mix Soda Dispenser on 10-10-2011 at 07:20 PM
    How many taps are you planning on putting out of the Venture?If you're just using 1 or 2 taps,
    it seems like you could hook up something like the pic attached. So you'd have a glycol loop
    that is chil...

  • Posted in thread: "Hacking" a Cornelius Venture Pre-Mix Soda Dispenser on 10-10-2011 at 07:14 PM
    To me the alternatives are quite expensive for home use; that's why most people settle on
    charging cornies.As I'm learning!?! Still, I stubbornly push on....I found this when
    researching wunderbar sys...

  • Posted in thread: "Hacking" a Cornelius Venture Pre-Mix Soda Dispenser on 10-10-2011 at 06:19 PM
    Ok, freezing would be the obvious reason, that makes me want to start designing some sort of
    water circulation system with a bypass for dispensing. It would probably be cheaper and easier
    to go with t...

  • Posted in thread: "Hacking" a Cornelius Venture Pre-Mix Soda Dispenser on 10-10-2011 at 02:43 AM
    what about using a cold plate like would be used for a wunder bar style soda dispenser?If it's
    not "wet" ice, I believe the liquid inside the block will freeze. More importantly, we can't
    spare the fr...

  • Posted in thread: "Hacking" a Cornelius Venture Pre-Mix Soda Dispenser on 10-10-2011 at 02:39 AM
    If yer an enthusiast, you'd be very concerned with the mineral profile. How do you dose
    minerals and still have it continuous? What is your water source?Well, you can't. There are
    limits to a home ins...

  • Posted in thread: "Hacking" a Cornelius Venture Pre-Mix Soda Dispenser on 10-10-2011 at 12:58 AM
    Why do you need continuous flow? Why not have one or two 5 gallon kegs filled with water and
    held at ~35 psi? Fill as needed.It's a fair question. Two answers:(1) As embarrassing as it is,
    it won't ta...

  • Posted in thread: "Hacking" a Cornelius Venture Pre-Mix Soda Dispenser on 10-10-2011 at 12:03 AM
    I know I'm something of a rare bird here, as I work on a *seltzer* rather than beer setup. But
    I know the equipment overlaps quite a bit and there are some really experienced soda techs on
    here. Basic...

  • Posted in thread: corny at 110psi (seltzer) on 10-04-2011 at 10:56 PM
    back to your problem:Most carbonators have a small tank (1-2L) where the water & CO2
    mix.Another possibility would be to pre-chill the water before it goes into the carbonator.
    That would let you redu...

0 COMMENTS
POST A COMMENT

Newest Threads

PHOTO OF THE DAY