Last Activity:05-09-2014 7:53 AM
Posted in thread: Some PB2 Advice on 01-06-2013 at 12:37 AM
Had to make a decision so went with 10.5 oz in a vodka slurry, about 16oz worth. Going to let
it sit for a while in the fridge and then throw it in the secondary.
Posted in thread: Some PB2 Advice on 01-04-2013 at 11:04 PM
I have been reading through threads on here to get an idea of adding some PB2 into my Chocolate
Porter. I am looking to add a subtle amount of peanut butter flavor to the beer, I don't want
it to be i...
Posted in thread: Weird carbonation issue on 09-04-2012 at 03:02 AM
Manifold is open and set around 14psi. I checked the tank and it's open as well (was going to
laugh at myself if it was closed)
Posted in thread: Weird carbonation issue on 09-04-2012 at 02:03 AM
So I have had an APA kegged and carbed for a while now. I have drank prob 1/3 to 1/2 the keg. I
went to pour some for a friend last week and it was completely flat. I have 14psi on it and its
Posted in thread: Two kegs in and I'm sold using syrups for variety rocks! on 06-30-2012 at 09:30 PM
I started doing carbonated water + rio extracts this week. We got black cherry , cola and cream
soda. As some others have stated we are finding them to be a little weak. I did 2 3/4 cup
splenda, 20oz ...
Posted in thread: DIY Beer Line Cleaner on 06-22-2012 at 01:24 PM
Yes, that's why people use MFL connections (aka "swivel nuts"). You get a barb to MFL adapter
that you leave with the tubing, then you get your disconnects with MFL fittings instead of
barbs. Then you...
Posted in thread: DIY Beer Line Cleaner on 06-22-2012 at 12:48 PM
Not sure I understand the questionOn a pin lock liquid post that has the quick disconnect, it
would be the post, then a nut with a barbed end inside it. The hose would be on the barbed end
with the nu...
Posted in thread: Sale or no sale we offer the best value on CO2 Tanks and Kegs! on 06-21-2012 at 05:50 PM
I have to say that I odered 2 new kegs from Beverage Elements around Easter time. Having never
heard of them before, but their prices were incredible, I took a risk and it paid off.I got my
kegs FAST ...
Posted in thread: DIY Beer Line Cleaner on 06-21-2012 at 01:06 PM
I was thinking of going this way, I havent tried but can you remove the nozzle with the hose
still attached from the liquid post? Cause if I have to take the hose off, which is a pain in
the ass I may...
Posted in thread: DIY Beer Line Cleaner on 06-19-2012 at 12:55 PM
I have a working pin lock version. All I did was get a pin lock post and a fitting that had the
same sized thread to 1/2" barb from chi company. Was a little more expensive than a HD or Lowes