Last Activity:02-02-2017 4:59 PM
Likes Given: 10
4 Likes on 4 Posts
Posted in thread: My StillDragon Controller Build on 01-21-2017 at 02:27 PM
Nice, but romex was a no-no. Upgrade it to cord with stranded cable when you can.Yeah I tested
with water yesterday, that Romex needs to go ASAP, it's a pain to deal with.
Posted in thread: My StillDragon Controller Build on 01-18-2017 at 06:55 PM
So below you will see my take on the StillDragon controller build. If you see something
obviously wrong please let me know. I really wish I had used actual 10-3 service cable instead
of 10-3 Romex. Th...
Posted in thread: Bee Cave Brewery Oktoberfest Ale on 08-05-2016 at 02:41 PM
I'm doing a BIAB version of this on Saturday morning. The grain/hop bill is identical to
Edworts the only thing that I changed was the mash (obviously). Here's what BF came up with:
post some brew d...
Posted in thread: Boulevard Smokestack Series Tank 7 Farmhouse Ale Clone on 06-28-2016 at 02:59 AM
Okay now that it's over I can state that the recipe I used a few pages back took first for its
style in the St Louis regional and a 30 overall at nationals with oxidation being by far my
Posted in thread: DMaDM Red IPA on 06-27-2016 at 10:12 PM
So now that I'm buying everything in bulk I wanted to whip up an IPA from mostly bulk
ingredients I have purchased. I made the beer below and it was amazing. This is a Double Malt
and Double Hop IPA. ...
Posted in thread: Help! At my wits end with kegging! on 05-28-2016 at 09:22 PM
Cool..Amazing what the right lines will do.Are you still running 10 ft lines with the flow
control? If it works after all this.DONT TOUCH A THING LOL. But again I run 4 fters with no
issue and a nice ...
Posted in thread: Help! At my wits end with kegging! on 05-24-2016 at 01:17 PM
Well I figured it out! When I replaced the line I noticed that the old line was much larger,
most likely 5/16ths, once the clamp was loosened it slid off really easily. When I put the new
Posted in thread: Help! At my wits end with kegging! on 05-23-2016 at 03:32 AM
I second this, either the material of the hose is stripping the beer all the CO2 or maybe the
line hasn't cooled enough to avoid this foaming.IMHO CO2 coming out of solution is the
Posted in thread: Help! At my wits end with kegging! on 05-22-2016 at 08:52 PM
At this point all signs are pointing to the gas. I think I'll move to a new vendor. I've
now:Checked everything for leaks.Replaced the beer line with 10 feet of new 3/16th tubing.To
answer some questi...
Posted in thread: Help! At my wits end with kegging! on 05-21-2016 at 10:41 PM
I'm sorry but you have a leak somewhere in your setup. Submerge all fitting in water. Che K all
threaded connections.At this point I'll do anything. I'll let you know the results on Monday.
I'll put e...