Last Activity:03-16-2014 2:06 PM
Posted in thread: Can I ferment completely closed in corny keg under pressure? on 09-19-2011 at 09:30 PM
Yeah, sounds dangerous to me. Consider that you can carb a keg completely with about 3 oz of
corn sugar. So you want to throw something in with 10+ pounds of grain and not let off the
Posted in thread: HOW TO: Wire an Auber SYL-2362A2 PID for a Fridge on 12-08-2010 at 06:09 PM
Is that 10 amp contact rating a inductive or resistive one?Compressors have a high inrush
starting surge way above the 4.3 amp running current.This thing will handle both. There is a
setting for using...
Posted in thread: HOW TO: Wire an Auber SYL-2362A2 PID for a Fridge on 12-08-2010 at 03:38 PM
Quick question. I received a free GE 25.3 cubic foot freezer. The compressor is rated at 4.3
amps, will I need a SSR along with the PID to use it as a keezer?User the SYL-2342. Its output
mode is rate...
Posted in thread: Sanke fermenter with a ball valve?? on 12-02-2010 at 10:25 PM
hmm. The description of that modified end cap reads:2" Modified End Cap $120 in stock 2"
Modified End Cap will work on any American Sanke BEER keg (with the valve removed).2" TriClamp
End Cap modified...
Posted in thread: Sanke fermenter with a ball valve?? on 12-02-2010 at 10:13 PM
anyone have a picture of this triclover setup on a sanke? I've been searching the forums but it
seems that most people use this setup for Mash Tun's and Brew kettles. I love the idea of
Posted in thread: Sanke fermenter with a ball valve?? on 12-02-2010 at 03:18 PM
I could just cork the 1 inch hole I have drilled and put some kind of a 90 degree angled air
lock into that. Maybe I'll just take some kind of copper tubing and bend it so the airlock can
stand up st...
Posted in thread: Sanke fermenter with a ball valve?? on 12-02-2010 at 02:16 PM
I've got a carboy cap and everything already fit over the spear hole and this is exactly what I
was planning on doing but instead of using pressure and a racking cane thought I could just
open the val...
Posted in thread: Sanke fermenter with a ball valve?? on 12-01-2010 at 10:06 PM
You can turn the keg up side down and use the tap connector with a 2" tri-clover and add a ball
valve to that. Then use the hole on top (the old bottom) for filling and blow off.I use a
Carboy cap ove...
Posted in thread: Deep Six Brewery - back in action! on 12-01-2010 at 04:54 PM
Man, all this almost makes me want to up my flood insurance and pray for a flood. I am about
300 feet above the 500 year flood plane. Tsunami...?
Posted in thread: Rubber Gasket Fell in Wort on 12-01-2010 at 02:21 PM