Last Activity:02-12-2015 8:30 AM
4 Likes on 3 Posts
Posted in thread: Major issues with my Barley Crusher today - this common to single roller mills? on 01-05-2015 at 11:56 PM
Since my last post the Captain stopped pulling grain completely. Left me dead in the water. So,
I contacted NB to send the Captain back. The guy told me the MM3 would likely do the same thing
Posted in thread: Major issues with my Barley Crusher today - this common to single roller mills? on 12-26-2014 at 12:03 AM
I actually planned to, but I still want to go with a different mill due to some of the reasons
already mentioned. Using the Captain Crush as an example (since I haven't decided fully yet), I
like how ...
Posted in thread: Captain Crush Grain Mill Gap Measurements on 12-25-2014 at 11:52 PM
Mine was working great... Then it started free-wheeling... I'd have to dump the grain and keep
F***ing with it...I did notice the shaft now has play in it like that. I'm not ready to give up
on it yet...
Posted in thread: First 20 gallon batch, NOT AMBER...? on 10-30-2014 at 02:05 PM
Does the percentage of color/flavor grains go up as batch size does? I doubled what I usually
use in my Amber, but the beer came out a caramel color. Most amber recipes I have seen use from
1-2lbs of ...
Posted in thread: California Hop Growers on 10-09-2014 at 02:16 PM
Bringing this thread back from the dead to add some missing info. I'm not affiliated but am
going to be buying some hops from them soon. www.hopsmeister.com Located in Lake County, both
organic and ce...
Posted in thread: What cord are folk using for larger wattage systems? on 09-29-2014 at 03:50 AM
Thanks for the help guys
Posted in thread: What cord are folk using for larger wattage systems? on 09-21-2014 at 02:33 PM
I'm building a 4500W/5700W RIMS/BK system using one of PJ's wiring setups and am wondering what
to do for the main supply chord from the 50A GFCI spa panel to my control box. PJ's diagram
Posted in thread: Homemade PBW Recipe on 08-06-2014 at 03:15 PM
I'm going to try this. I've got some bad ass cleaning to do. Haven't brewed since my son was
born. He's 17. Left carboys uncapped for that time. I'm scraping mice off the bottom of the
carboys with a ...
Posted in thread: Did I get a bum stc-1000 unit? on 07-31-2014 at 12:49 PM
I like that picture. One thing to note on the plug is that the tab on the hot/cold side is
broken off, while the side with the neutral wire has the the tab intact. That way the hot/cold
are 2 separate...
Posted in thread: Did I get a bum stc-1000 unit? on 07-31-2014 at 12:43 PM
Thanks again. As soon as I was corrected, it all made sense. I ran home for lunch and in about
15 minutes had it wired up correctly and thing were getting cold again. I did indeed wire a fan
in right ...