VIEW MY

Gimlet

Gift Premium Subscription To Gimlet

Join Date:

03-12-2009

Last Activity:

10-23-2013 4:57 PM

Likes Given: 2

1 Likes on 1 Posts 

    ABOUT ME

  • Male
  • Married
  • Oak Creek
  • WI

LATEST ACTIVITY

  • Posted in thread: Stout on Nitro only, not beergas. No cascade or cream? on 03-28-2012 at 04:11 AM
    My understanding was that the tiny bubbles came from the nitrogen coming out of the beer. If
    nitrogen doesn't dissolve into beer, that would seem not to be the case.Don't the tiny bubbles
    come from th...

  • Posted in thread: Incorrect amount of priming sugar desperate solution on 01-28-2012 at 11:21 PM
    Isn't the concern with carb tabs in this situation that they could provide nucleation sites for
    the CO2 already in solution? You could have a Diet Coke + Mentos scenario on your hands adding
    carb tabs...

  • Posted in thread: List of beers with swing-top bottles on 12-26-2011 at 08:26 PM
    Schwelmer Pils and it's cheap. My bar sold a bunch for $3.50 I think, and I took home the
    empties :D+1 I have a couple cases of Schwelmer swingtops from their hefeweizen. Also have come
    across Hacker ...

  • Posted in thread: Opening a Pub / Feedback please! on 12-23-2011 at 03:46 AM
    Please have somone correct the grammar on your survey before you hand it out.

  • Posted in thread: Unfamiliar Corny keg on 12-23-2011 at 01:21 AM
    I don't see why it wouldn't work if you can find posts to thread on it. strange that there are
    4 spots for posts. Are there gas-in and liquid-out dip tubes in there? Can't tell from the
    picture.

  • Posted in thread: Leave the Gas On? on 12-17-2011 at 04:08 AM
    I would think nothing would happen. Just let it thaw out. The head pressure in the keg would go
    up since all the CO2 would come out but the kegs are rated to around 100psi so I would think
    they could ...

  • Posted in thread: My keg tastes terrible. on 12-16-2011 at 08:56 PM
    I may have figured something out.Does PBW require rinsing?Yes. With as warm or warmer water
    than whatever temp the PBW solution was at. That would be an easy fix if it were your problem!

  • Posted in thread: Accurate Volumes of CO2 on 12-15-2011 at 09:19 PM
    I thought when it comes to cooling - if your controller set point is 42 with a differential of
    4, then the temp will range from 42 to 46. Not 38 to 42.According to my A419 manual (see figure
    7), when ...

  • Posted in thread: Accurate Volumes of CO2 on 12-15-2011 at 08:11 PM
    This question is probably more academic than practical, but here goes:I'm using a Johnson A419
    temp controller on my newly finished keezer. I have the set point at 42*F with a differential
    of 4*, whic...

  • Posted in thread: Beergas is Expensive in Tampa...any Suggestions? on 12-15-2011 at 07:55 PM
    My twin brother works at a place called Airgas Retail Solution they are a twin company for
    Airgas but have WAY lower pricing. 20lb refill is $16-20$ i believe and 50lbs is
    $28-$30(depending on region)...

0 COMMENTS
POST A COMMENT