Last Activity:10-23-2013 8:19 PM
16 Likes on 12 Posts
Posted in thread: dry hopping question on 08-31-2013 at 04:31 AM
I just finished my zombie dust clone. I dry hopped for the first time but read every possible
post on the subject. My process was to just dry hop in the primary. I let primary fermentation
go for 2 we...
Posted in thread: 3 FLoyds Zombie Dust attempt. Help/info requested on 08-31-2013 at 02:56 AM
Brewed this on 7/21/13 for a fantasy football draft tomorrow (8/31/13). This beer is amazing! I
used the S-04 yeast. It fermented fast and I dry hopped for 10 days with 3 oz of Citra. This
will be the...
Posted in thread: Zombie Dust Availability on 08-31-2013 at 02:48 AM
I know in my area (southern Indiana) the liquor store I visit, the owner said he's only
allocated 2 case a month but he's never gotten the full 2 cases. A week after I asked him and
he told me not to ...
Posted in thread: Keg conditioning on 08-12-2013 at 09:34 AM
Does anyone here transfer out of primary into kegs to condition? If so do you condition at
serving pressure or just enough CO2 to remove oxygen?
Posted in thread: plate chiller or counterflow? on 08-01-2013 at 05:02 AM
I'd go with a pump also. Get the pump and then you can make a DYI counterflow for like $50.
Posted in thread: All Grain Keg Setup Looking For Input on 08-01-2013 at 03:38 AM
+1 on the dip tube. Here is my false bottom with dip tube and I have barely any liquid in my
MLT after its drained. 138623138624138625
Posted in thread: Barbs on Counterflow Chiller Unnecessary? on 08-01-2013 at 03:31 AM
I actually lose very little. Maybe a quart in the chiller and a quart under my false bottom. I
actually lose just as much due to my hoses as I do that's left in the chiller.
Posted in thread: Barbs on Counterflow Chiller Unnecessary? on 07-31-2013 at 11:44 PM
That thermometer is like $25 from brewhardware. It's spot on accurate and adjustable. I'm going
to remove the threaded connector and add a 45 degree street elbow so I don't have to bend down
to see it...
Posted in thread: Barbs on Counterflow Chiller Unnecessary? on 07-31-2013 at 10:04 PM
If you're going to sweat the fittings, just add threaded fittings like this and limit the
number of clamps you use. Mine hasn't leaked a drop of wort or water. 138526138527
Posted in thread: Bigger starter on 07-31-2013 at 08:35 AM
With all these posts on larger starters, I'm starting to wonder if the starters I'm making are
big enough? For a 5 gallon centennial blonde I made a few weeks ago with WLP002 I just did the
normal 2 c...