Last Activity:01-20-2015 10:56 AM
Likes Given: 4
8 Likes on 8 Posts
Posted in thread: RIMS Diameter on 05-07-2013 at 01:22 AM
1.5" is what I use. 220volt, 3500 ULWD element. No problems. As with any RIMS system, keep the
Posted in thread: BCS Temp probe to Cat5e Help on 05-07-2013 at 01:05 AM
Yes, use one and 8. This is on the bottom of my ebrewsupply panel. Outside,
Posted in thread: Before I burn the house down; RIMS control on 03-13-2013 at 02:13 AM
Cant ground a wooden stand. Just make sure you ground the kettles (if they have an element) and
RIMS. You'll love the RIMS system once you run a few batches. All setups are have their quirks.
Posted in thread: Before I burn the house down; RIMS control on 03-12-2013 at 11:19 PM
I have a brewhardware RIMS and use the stud inside the electrical connection cover to ground
and take back to the box. You could do the same by tack welding or drill and thread a hole and
insert a stu...
Posted in thread: Propane to all out electric build on 02-12-2013 at 02:27 AM
Hood is under construction. I've brewed 3 times on it so far over the last two weeks. All three
times I was in the 60s so I opened the garage door and turned on a small fan. The BK is right
by the gar...
Posted in thread: Propane to all out electric build on 02-09-2013 at 11:24 PM
Ok, so I ran again today. A play on Ed Worts Haus Pale Ale but using Jade hops for middle and
late additions. Also will dry hop a small amount before kegging. Ambient was 60 degrees, but I
think my ke...
Posted in thread: Propane to all out electric build on 02-09-2013 at 01:42 PM
So you say even though the grain bed is holding at the correct mash temp, I need to more
concerned with the temp flowing through the tube. I read the grain bed temp but not as an
output control. My wo...
Posted in thread: Propane to all out electric build on 02-09-2013 at 03:25 AM
97F9969-EE35-4963-9633-0F8739A6F0EF.JPGFirst full run tonight. Choose Biermunchers Blonde for
Posted in thread: Quick questions on what everyone else is doing on 02-03-2013 at 08:37 PM
I'm working on legs for the IC as I type this. Easy to do. As for full boil loss, Im still
trying to get that number but I'm close. I have grain absorption, trub down from old system. I
guess I need t...
Posted in thread: First run on RIMS tube on 02-03-2013 at 01:49 AM
Your control panel reminds me of R2D2 watching over the brew process. Your in good hands.