fusa

Gift Premium Subscription To fusa

Join Date:

02-18-2010

Last Activity:

08-20-2014 7:57 PM

Likes Given: 2

15 Likes on 11 Posts 

    ABOUT ME

  • homebrewing
  • Blues, Jazz, Classic Rock, R&B, Classical, Reggae
  • Jeffery Deaver, John Grisham, David Baldacci, Stephen King, Dan Brown
  • Male
  • Single
  • Blacksburg
  • VA

LATEST ACTIVITY

  • Posted in thread: Help with 5 amp fuse blowing on 08-19-2014 at 10:52 PM
    Here is the finished panel. I really liked The Electric Brewery's design. Thanks Kal, P-J and
    icebob for the help and inspiration to complete this.

  • Posted in thread: Making Soda at Home - The Giveaway! on 08-19-2014 at 10:50 PM
    I'm in

  • Posted in thread: Help with 5 amp fuse blowing on 08-19-2014 at 12:27 AM
    yeah, already did, worked fineAnd thanks for going over this, just saved me $68

  • Posted in thread: Help with 5 amp fuse blowing on 08-19-2014 at 12:14 AM
    Ok, changed it and the power button is operating as expected.Thanks again

  • Posted in thread: Help with 5 amp fuse blowing on 08-18-2014 at 11:54 PM
    Actually after checking my order again I ordered the correct switches. Now I am confused why
    pin 14 stays on, since the diagram for SW1 saws they are both NO.

  • Posted in thread: Help with 5 amp fuse blowing on 08-18-2014 at 11:48 PM
    The SW1 switch (the correct one in the diagram) is both NO. The SW11 switch (the one I
    installed) pin 24 is NO, pin 14 NC. Using SW1 will turn power on for everything, then turn
    everything off when pr...

  • Posted in thread: Help with 5 amp fuse blowing on 08-18-2014 at 10:44 PM
    Yes, i ordered the correct switches, will replace them when they arrive.

  • Posted in thread: Help with 5 amp fuse blowing on 08-18-2014 at 10:38 PM
    I checked Auber Instruments site and I had ordered SW11, not SW1 switches. I also programmed
    the timer so it is sounding the alarm when it finishes countdown, not while it counts
    down.Thanks again for...

  • Posted in thread: Help with 5 amp fuse blowing on 08-18-2014 at 02:53 AM
    I am also confused about the purpose of the power button. Right now I am able to use everything
    with the power button off except the element switch. Is this correct?

  • Posted in thread: Help with 5 amp fuse blowing on 08-18-2014 at 01:13 AM
    I am a bit confused about how to wire the selector switches for the two alarms. In the diagram
    I have 11 go to 1 on the switch, and 12 in the diagram go to 2 on the switch. This causes the
    alarm to so...

0 COMMENTS
POST A COMMENT