Last Activity:03-08-2014 5:17 PM
2 Likes on 2 Posts
Posted in thread: more about peanut butter on 01-28-2013 at 04:44 PM
After reading all I could find on how to add PB I am brewing PB stout tomorrow. At this point
thinking of making a slurry of boiling water & PB then pouring in paint straining bag suspended
in boil. I...
Posted in thread: Raisins for carbonation? on 10-16-2012 at 04:29 AM
My Dad brewed once in the 60's. I do remember it did have at least one raisin in each bottle. I
was young so I do not know if it was for carbonation or not.
Posted in thread: propane price @ gallon exchange tank VS owned on 10-05-2012 at 03:45 AM
I picked up my tanks beside the road out for trash. Exchanged for newer filled tank.
Posted in thread: FAMILY what doyou think? on 08-24-2012 at 08:13 PM
It is a 3hr drive back do not think I will go back for the beer. Now we have request for empty
bottles with the labels and pictures of labels. I do not get the fascination of the labels if
you don't w...
Posted in thread: FAMILY what doyou think? on 08-24-2012 at 03:59 AM
Recently we attended a family reunion. Each year they hold an auction of white elephant items
to raise money for the next reunion. I asked the wife if it would be ok to throw in a mixed six
of home br...
Posted in thread: Gas hose on 08-04-2012 at 03:36 AM
Thanks now I see how they work. I may just notch the hole or I will try to locate these clamps.
I just do not want create my own problem with a leak.
Posted in thread: Gas hose on 08-03-2012 at 10:01 PM
My clamp has the square holes with the peg protruding through but the tab sticking out is more
like small mushroom then a rectangle. Do you need a special tool to clamp?
Posted in thread: Gas hose on 08-03-2012 at 09:03 PM
I am ready to drill holes in keezer collar for gas in. The clamp from the factory has a small
mushroom shaped bend standing out. Should I drill the hole large enough to get this through or
take off th...
Posted in thread: GE 7 CF (FCM7SUWW) keezer conversion on 07-30-2012 at 03:22 AM
I am to the point of drilling holes in collar for hinges. The collar will be attached to the
lid. Do I just put the seal on the collar set it on and mark the holes or do I need to allow
Posted in thread: DIY Beer Line Cleaner on 07-23-2012 at 05:52 PM
To work on a Cornelius post I used part A-117 ,1 nylon washer & white washer from sprayer