Last Activity:02-19-2014 11:04 PM
Posted in thread: C02 Pressure Relief Valve on 02-19-2014 at 07:10 PM
Hi, I'm not sure if I'm the most qualified person to answer your question but I know a few
things that could assist you. By law (I think) all co2 tanks have a 3000 PSI PRV in case of
excess pressure. ...
Posted in thread: Before and After - I decided to clean my regulator! on 11-04-2013 at 04:13 AM
Wow... I feel so dumb. I know that the high pressure side was left handed, I just never made
the connection that I have to turn it the other way! Also, to add to that I didn't even read
Posted in thread: Before and After - I decided to clean my regulator! on 11-03-2013 at 11:46 PM
I purchased a new regulator off ebay and when I got it I could tell it was brand new but that
it had been sitting in a warehouse for many years. I used a product from my local hardware
store (Brasso) ...
Posted in thread: Help finding fitting for regulator (lLHT to RHT hex) on 10-24-2013 at 07:29 AM
I recently purchased a Taprite 3740 regulator. I haven't received it yet but from my research
I've discovered that the high pressure ports are left handed threads. I'm looking for a small
pipe that is...
Posted in thread: How to get 1/4" Beer Line Onto 3/16" Barb :) on 10-24-2013 at 05:39 AM
I'm not guaranteeing this will work, but you can dip the ends of the line into boiling water to
heat up the tips. Then just do your best to force it onto the barb. Who know it might work.
Posted in thread: [HELP] CO2 regulator acting weird, is it broken? on 10-13-2013 at 10:13 PM
So I was able to take apart my regulator and I think I found the problem! contacted the seller
and got an immediate refund! I can't believe anyone would sell this as a "kegging / soda"
Posted in thread: [HELP] CO2 regulator acting weird, is it broken? on 10-09-2013 at 05:58 PM
Unless the vendor is going to replace it, it may be time to open it up and check the guts.pbI
was arriving to this conclusion myself yesterday. I watched a few instructional videos about
how to open a...
Posted in thread: [HELP] CO2 regulator acting weird, is it broken? on 10-09-2013 at 05:41 AM
I bought it online (ebay). Its made in china, I don't know what brand it is. Says "SRF
YQT-731A" on the regulator.
Posted in thread: [HELP] CO2 regulator acting weird, is it broken? on 10-07-2013 at 09:46 PM
Thanks for the response!I have a gauge on my tank and also on my regulator for tank pressure.
They both indicate that they tank is fine. Also I have to manually unscrew the regulator to
release the pr...
Posted in thread: [HELP] CO2 regulator acting weird, is it broken? on 10-07-2013 at 07:52 AM
Hi,I have a newish regulator which I've been using for about 2 or 3 weeks for carbonating soda.
I set it up to the correct PSI and made sure it wasn't leaking and begin using it. It worked
for about 3...