VIEW MY

freelunch

Gift Premium Subscription To freelunch

Join Date:

01-25-2011

Last Activity:

03-17-2014 10:30 PM

    ABOUT ME

  • Single
  • dfw
  • TX

LATEST ACTIVITY

  • Posted in thread: S-04...putty on 09-24-2013 at 03:58 AM
    I hade the same type of experience last month with an S-23 yeast cake. Not completely solid
    like yours, but it was a persist 1.5" layer that required a high pressure hose to remove.

  • Posted in thread: It's IPA Day! on 08-02-2013 at 02:23 AM
    I tried 3 small batch IPAs at a local brewery - sad enough their regular IPA was hoppier and
    tastier.

  • Posted in thread: 3 way Co2 Distributer -Can I make it 4? on 07-24-2013 at 04:15 AM
    If it is a primary reg, I thought they are left hand threads, on the sides.Talking distributor
    block, not regulator.

  • Posted in thread: Things about your co-workers that annoy you on 07-19-2013 at 04:52 AM
    Two major annoyances. The company parrot - the guy that receives the company or department wide
    e-mail (that we all get) and forwards it to the whole department with nothing but "FYI" added
    in. Slow &...

  • Posted in thread: Things about your co-workers that annoy you on 07-19-2013 at 04:45 AM
    No need to worry about the differences between a hard days work and working hard for days -
    each have their stresses depending on how folks apply themselves.

  • Posted in thread: You want to brew in WHAT!?!?!? on 07-18-2013 at 04:42 AM
    The ones I've found are just old steel drums but I was thinking there has to be like a giant
    food grade trash bag or something you could just put in it and then seal up. Bam 55 gallons of
    beerFood saf...

  • Posted in thread: Keg Type Question on 07-16-2013 at 02:18 PM
    Ball vs Pin is the connector type for the gas an liquid posts. These can be changed as the post
    is screwed on. Due in part to the inherent height of pin lock connectors, a keg that was
    originally a pi...

  • Posted in thread: check this break material!! on 07-14-2013 at 08:12 PM
    As a relatively new brewer, I am fascinated by this.Can someone please explain what that is and
    is it specific to a particular style of beer or ingredients?It looks slightly similar to clumps
    that I g...

  • Posted in thread: Prefered bottle orientation? on 05-30-2013 at 04:03 AM
    For the purposes of carbonation, there is no benefit in orientation, as the CO2 is being
    produced in the liquid where it will be absorbed if sufficient pressure or low enough
    temperature is present to...

  • Posted in thread: Store bought Beer stored in a kegerator on 05-25-2013 at 04:12 AM
    Not sure who you will find to fill a 5gal corny with commercial beer, but it will not be flat
    so long as you keep and serve it under pressure.

0 COMMENTS
POST A COMMENT