Last Activity:11-23-2015 6:32 PM
Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 04-20-2015 at 09:53 PM
Won't let me.
Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 04-20-2015 at 06:19 PM
Hi all,I'm in the process of building my brewpi. Just wanted to put this out there if it can
help anyone else. I was able to successfully build the latest 0.2.8 firmware with support for
Posted in thread: So who's brewing this weekend? on 03-11-2012 at 12:11 PM
First attempt at a lager today, a schwarzbier.
Posted in thread: So who's brewing this weekend? on 10-30-2011 at 05:07 PM
Stone 03.03.03 Vertical Epic Clone holding steady at 150 degrees in the mash tun.
Posted in thread: Anybody know what this fitting is? on 07-11-2011 at 08:03 PM
Thanks for the suggestions. I ordered a flare coupling and "long" nuts for 1/4" tubing. The
opening on the nuts is .26" diameter, the diameter of the threads on the jet tip are .32" so I
should be abl...
Posted in thread: Anybody know what this fitting is? on 07-10-2011 at 08:54 PM
I'm looking to redo the pilots on my Brutus style system. I found the attached picture and
thought, that's perfect as I have a handful of extra jets from my old burners. Problem is, I
can't seem to fi...
Posted in thread: Perl Faucet Problem-Help! on 06-01-2010 at 12:14 PM
I ended up buying a new tower. The shanks that came on it worked with the new Perls. I'm sure I
could have just changed the shanks but it would have been a pain trying work inside my old 3"
Posted in thread: Blichmann Engineering "set-it-and-forget-it design" Auto Sparge? on 05-06-2010 at 06:21 PM
I am a RIMS brewer and I started this thread shortly before I got mine and never experienced a
hot spot because of the tubing.Every batch I've done with the autosparge, I'll stick my
Thermapen into th...
Posted in thread: Blichmann Engineering "set-it-and-forget-it design" Auto Sparge? on 05-06-2010 at 12:51 PM
I've been using mine since January on my Brutus clone. I decided to stop using the float as it
doesn't close fully as others have said. Instead I just set my flow rates with my 2 pumps. My
Posted in thread: So what's my efficeincy? on 05-05-2010 at 02:18 PM
I have a Barley Crusher, you'll love it! Once you do start milling your own grain, give malt
conditioning a try. You can search for threads on here and BYO and Zymurgy both did articles on
it. It's wh...