Gift Premium Subscription To FreddyMar3

Join Date:


Last Activity:

11-22-2016 3:34 AM

Likes Given: 27

63 Likes on 45 Posts 


  • Brewyn in Berwyn
  • Male
  • In a Relationship
  • Berwyn
  • PA


  • Posted in thread: Brew Boss Systems on 10-27-2016 at 12:18 AM
    Anyone else have issues with the element housing rusting and cracking? 374984374985

  • Posted in thread: Brew Boss Systems on 09-29-2016 at 03:47 PM
    In lieu of a site glass, I use this for $3: bent it so it hangs from my kettle lip and then
    measured out the gallons by inches.

  • Posted in thread: 5-15 gal eBIAB system + brewery build on 09-27-2016 at 06:08 PM
    I've made a half dozen batches on mine now, and have found a few interesting things.1) the
    tangential whirlpool recirculation is not optimal for returning the output of a
    counterflow/plate chiller for...

  • Posted in thread: Brew Boss Systems on 09-15-2016 at 02:36 PM
    Has anyone tried building their own version of the COFI filter? I was thinking about trying to
    have something very similar fabricated as it would be much less expensive then paying close to
    $500 for t...

  • Posted in thread: Brew Boss Systems on 09-12-2016 at 09:13 PM
    Disassembled my pump head for the first time last night after brewing. It was mostly clean, the
    only issue was that on the round metal part of the impeller assembly, where I assume it is
    magnetic, the...

  • Posted in thread: Backflushing a Chugger pump? on 09-12-2016 at 08:57 PM
    +1 to taking it apart, and doing so more often than you'd think. I went too long and just took
    mine apart after 15 brews... it had caked up black crud (I recirc during boil) and a big chunk
    of hop stu...

  • Posted in thread: Brew Boss Systems on 08-04-2016 at 06:42 PM
    I "sparge" as well. takes a few extra minutes to pour some hot water over the top of the grain
    and buys me 1-5% in efficiency. sometimes i don't even keep it hot. pull it off before dough in
    and then ...

  • Posted in thread: 5-15 gal eBIAB system + brewery build on 07-11-2016 at 07:05 PM
    I understand all that. He needed a filter that had 3.5 inch feet to fit over the dip tube in
    his BH kettle. The BH kettle was chosen for its relatively more narrow profile than typical 20
    gal kettles....

  • Posted in thread: Help w/ BIAB Basket Mesh Sizing (400v600v800) on 06-20-2016 at 01:36 AM
    I have a 400 micron basket and wouldn't want to go any smaller. I had an air bubble form
    underneath on the first brew because the pump was not throttled enough. Anything smaller than
    that for grain is...

  • Added a new Photo on 06/17/2016