Last Activity:02-17-2013 4:13 PM
12 Likes on 4 Posts
Posted in thread: Getting ready to start big fermentation chamber on 01-11-2013 at 12:00 AM
I just built one similar last winter. Not as tall but its still decent size. I used 2x4's and
rigid foam and the capped it all with plywood.
Posted in thread: BIAB brew stand with hoist and pump on 01-10-2013 at 11:10 AM
I didn't adjust anything except the crush on the grain. Basically hitting the exact same
numbers as my brutus without as much work. With the brutus I had to switch hoses, attach the
sparge lid and arm...
Posted in thread: BIAB brew stand with hoist and pump on 01-09-2013 at 01:04 PM
My mash temp for this recipe was 150. I had to heat a little after dough in because my temp
dropped to 148. Got it to 150, stirring the whole time. I killed the heat, threw two towels on
top and left ...
Posted in thread: BIAB brew stand with hoist and pump on 01-09-2013 at 12:52 PM
The boil and into the fermenter:
Posted in thread: BIAB brew stand with hoist and pump on 01-09-2013 at 12:50 PM
Brewed a batch of IPA on the new stand. Worked awesome! It was by far the easiest brewing I've
done compared to the single tier 3 kettle Brutus system. I did 10 gallons of IPA. I first
changed my Barl...
Posted in thread: BIAB brew stand with hoist and pump on 01-03-2013 at 08:36 PM
Finally going to brew with the BIAB stand. I have the yeast on the stir plate and the grain is
ground and ready. I hope to brew tomorrow. Spent last night and most of today cleaning kegs,
Posted in thread: What's your occupation: Engineer or Non-Engineer on 01-02-2013 at 09:50 PM
Own a landscaping install and maintenance company.
Posted in thread: BIAB brew stand with hoist and pump on 12-21-2012 at 12:31 AM
I actually have not brewed with this yet. I know that sounds crazy but I got married last year
and between that, work, money and other hobbies I just haven't started again. I do have a
Posted in thread: BIAB brew stand with hoist and pump on 08-17-2012 at 01:33 PM
As far as the sides of the basket pulling in with weight, the bayou classic pots are more than
strong enough. To test the tipping capacity I stacked over 40# of weight into the basket,
hanging from th...
Posted in thread: BIAB brew stand with hoist and pump on 08-17-2012 at 01:28 PM
I'm getting closer to brewing again. Kegs are empty and the weather is cooling off finally. I'm
trying to finish another project, a sand rail build, before brewing. So many projects with so
- Here's a cheap but attractive way to mount drip tray to keezer.
- Possible CO2 leak
- List of PJ Electrical Diagrams
- Mr Beer - Read all about it and ask questions
- My first taste of Lite beers
- Keep One, Drop One - Word Game
- Bottling Rant
- What are you drinking now?
- Any experience with T-58 yeast?
- Dual Pressure CO2 Regulator Help
- West Sixth start up brewery being sued by Magic Hat parent company over logo