- Posts 14
Last Activity:02-16-2012 2:11 PM
Posted in thread: Yeast starter with no Krausen on 12-24-2011 at 04:08 PM
Chances are it fermented out. With a smaller starter like that it'll happen quick. Was the wort
milky in color?If that's the case, what needs to be done to be able to pitch?I'm in the same
boat as OP ...
Posted in thread: How to make a yeast starter - Pictorial on 12-21-2011 at 06:19 PM
Thanks so much for this thread. I did my first yeast starter Friday night for my Saturday
brewing. I made a 1 liter starter using WLP005, and after I pitched it was rocking about 4
hours later. For so...
Posted in thread: Buh-bye, Carboy Brush on 12-14-2011 at 12:23 PM
Can anyone source the parts to make a tiny bottle cleaning one? :rockin: tiny are you talking?
Posted in thread: Stupid Elec't Noob Question!! on 11-30-2011 at 02:11 AM
A Leviton brand with heatsink is good for a 2000w load. Frequently Asked Questions from Leviton
Posted in thread: E-HERMS Build on 11-29-2011 at 08:49 PM
ready to watch as i am in the same process to start purchasing and converting to e-brewingMe
Posted in thread: Best practices for washing bottles... how do you do it? on 11-18-2011 at 10:57 PM
I guess my question is: is rinsing right after drinking then running them through a dishwasher
cycle enough to sanitize them? If not I shall buy a vinator and rinse with star-san, I just
don't know if...
Posted in thread: Will my old Absocold dorm fridge work to cool a fermentation chamber? on 11-08-2011 at 08:53 PM
Sorry to bump an old thread, but I was searching for ferm chamber ideas and found this.I built
my first chamber based off that little dorm fridge. It works great. I just hooked up a eBay
Posted in thread: ebay aquarium temp controller build on 11-08-2011 at 02:40 PM
Depends on the style, the strain of yeast, and what flavor profile you're aiming for. As low as
13°C (55°F) and as warm as 21°C (70°F) is pretty common, and Belgians are often much warmer
still - even...
Posted in thread: ebay aquarium temp controller build on 11-08-2011 at 01:16 PM
My 2 controllers came in yesterday, and I set one up real quick using the receptacle box idea
as shown in this thread.I have a question, I am taping my probe on the side of my carboy.What
Posted in thread: Wooden Bottle Crate for 22oz Bottles on 11-03-2011 at 09:23 PM
OK, this is all I have time for today.Just messing around with stenciling. :mug:Needs another
coat of stain and a couple coats of poly this weekend, along with the (4) others.