fakr

LATEST ACTIVITY

• Posted in thread: Brewhemoth conicals? on 04-16-2013 at 04:46 PM
  Ah, I ask because I have a chest freezer with a custom box built on top...If I remember
  correctly the dimentions are 26"x46" and holds both of them, though it's a tight
  squeeze.Problem I found trying ...

• Posted in thread: Brewhemoth conicals? on 04-16-2013 at 03:48 PM
  stand up or chest freezer?

• Posted in thread: Brewhemoth conical clean in place (CIP) systems on 04-16-2013 at 01:21 AM
  That pump won't do for that big of a cip as its only rated for 948GPH, which is about a litre
  per second. you're going to want a higher flow like 2500+GPH. don't worry about the pressure
  rating. That'...

• Posted in thread: Brewhemoth conical clean in place (CIP) systems on 04-04-2013 at 01:43 PM
  The liberty HT41M sump pump I bought a couple of weeks ago works extremely well. AT 60GPM and
  200F rating, it blasts the inside of my brewhemoths. Very much worth the money.The hardest part
  with this ...

• Posted in thread: Brewhemoth conicals? on 03-12-2013 at 09:59 PM
  Inline regulators, like in the pic, typically bleed off excess pressure from kegs when you
  adjust the pressure down...and that's exactly what a spunding valve does.The bonus about using
  a quality inli...

• Posted in thread: Brewhemoth conicals? on 03-12-2013 at 09:55 PM
  Here's a pic of what I'm talking about..it doesn't show the port on the top of the brewhemoth
  but you get the point.107111

• Posted in thread: Brewhemoth conicals? on 03-12-2013 at 09:52 PM
  The only suggestion I have for you is to mix up some rinseless sanitizer, like starsan, in the
  brewhemoth with the spunding valve attached to the dump or racking port. Turn the pressure knob
  to 0psi, ...

• Posted in thread: Brewhemoth conical clean in place (CIP) systems on 03-04-2013 at 01:59 PM
  Guys, I did a little research on the sump pump I bought and thought I should share the
  information I found.It appears as though most sump pumps that are not rated for hotter
  temperatures (most rated f...

• Posted in thread: Brewhemoth conical clean in place (CIP) systems on 02-26-2013 at 11:13 AM
  I used hot but I took the screen off the bottom and everything looks ok, I didn't see large
  amounts of oil or anything by the impeller.Maybe it just cleaned the Brewhemoth that good,
  LOL.haha! yeah, m...

• Posted in thread: Brewhemoth conical clean in place (CIP) systems on 02-25-2013 at 06:50 PM
  Hmmm, did you use hot water? maybe the pump overheated and sprung a leak?